can't find RS2 engine HP and Nm diagram

[dainys]

Hello,
do you know any links, where is a graph of RS2 engine HP and Nm?
Thanks

[S2central.net]

I've seen it in an RS2 brochure - well the marketing version of the graph anyway. Try www.s2-audi.co.uk and look for the RS2 brochures.

PAul

[Skaala]

it is in the RS2 user manual

[Lloyd]

Try this link for graph of my engine....

http://www.s2forum.com/photoplog/index.php?n=1384

[EspenW]

Try this link for graph of my engine....

http://www.s2forum.com/photoplog/index.php?n=1384

300hp at the wheels should mean more than the indicated 350hp at the flywheel.
B7 RS4's pull approx 300bhp at the wheels. They are rated (slightly overrated?) at 415bhp at the flywheel.
034 Motorsports Audi 80 pulls 397hp at the wheels, for an indicated 622hp at the flywheel. (this is on a Maha)
I guess the Dastek (your dyno) operator simply performed an unloaded coastdown and added that to the wheel figure, this is wrong, since drivetrain loss increases with increasing power (more load and friction on bearings, increased windage, etc)

[Lloyd]

300hp at the wheels should mean more than the indicated 350hp at the flywheel.
B7 RS4's pull approx 300bhp at the wheels. They are rated (slightly overrated?) at 415bhp at the flywheel.
034 Motorsports Audi 80 pulls 397hp at the wheels, for an indicated 622hp at the flywheel. (this is on a Maha)
I guess the Dastek (your dyno) operator simply performed an unloaded coastdown and added that to the wheel figure, this is wrong, since drivetrain loss increases with increasing power (more load and friction on bearings, increased windage, etc)

I can't comment as I know very little about rolling roads and their use etc. I thought the numbers seemed OK as did Mihnea who had a quick look at ADI following the session. Feels ok put it that way!

[Lloyd]

I know for a fact that the new RS4 is no faster than this car until circa 110 mph. The new RS4 then gathers more pace and overtakes....... Have proved this a couple of times on track with different cars.