Anyone with the above for the centre console.
TVM.
TVM.
-
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.uk -
Remember that grey faces = S2 and white face = RS2. Which do you want? -
.
Prefer the look of white.Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
I have a set of white faced LHD RS2 aux gauges.
RHD RS2 gauges had three seperate 52mm gauges,
LHD RS2 is one complete unit.
Just off out for a bit, will stick a picture on when I get back if you are interested?.
Jas..2001 Avus Silver B5 RS4.
2004 A4 Avant 1.8T quattro Sport-LE.
1995 S2 Coupe - sold (sniff)Comment
-
.
Pics will be good, how easy, difficult is it to swap over black to white?
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
Should not be too bad think you might just need to mod the plug on the back but there are threads to tell you how to do this nothing major.
Only other thing think u might need to do is to put the gauges into the panel that holds the black gauges as the holders different iirc.Comment
-
Hmmmmmm...
Thought all the gauges were the same size? Just the colour was the major diff?
Oh well out wiv the ruler and check me gauges tomorrow.
Still keen though.Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
They are the same size but from what i've been told its the mounting for the panel which is the problem easy to swap over 6x finger nuts to swap the guages.Comment
-
.
Cheers Acidburn...Jas11n, get back from the pub right now!
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
Wish I'd been to the pub
Yep, Pete is right, you need to remove your old gauges + the mount and swap the new unit in. I'll dig out a thread from last year talking about these in a minute.
You are welcome to try them, see if they work, if so, buy em. If not send them back.
Can't say fairer than that.
Here's the pictures;
2001 Avus Silver B5 RS4.
2004 A4 Avant 1.8T quattro Sport-LE.
1995 S2 Coupe - sold (sniff)Comment
-
Also check out terrybullwon's threads as he's just done this as well so it can be done. There was a few links he had with the details. Should not be too much of a problem tho.Comment
-
S2|Andreas's thread >>> *here*.2001 Avus Silver B5 RS4.
2004 A4 Avant 1.8T quattro Sport-LE.
1995 S2 Coupe - sold (sniff)Comment
-
.
As they're going into a b4 chassis the swap may be slightly easier
Certainly like to try.
PM's to follow.Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
firstly just needs the panel swapping not too bad.
The wires you could either take the plugs behind and either solder them onto the connections or put terminal plugs on the end.
Should not be too hard and should be easy enough.Comment
-
Whohoo...
Arrived today...cheers Jas11...
Anyone manage to source the connecting plastic pug and terminal pins?...for that extra neat job...
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
Comment