I have about 4/5 of these, as each on I brought was different! I have 3 sets of WHITE VDO gauges and 2/3 sets of Black Gauges with the center console on 2 of them! they all look different to me! I don't understand!
-
-
Jesh...
Can you put some pictures up...are they all from b3/4 chassis cars?
B******y German engineering...Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
Yeah no probs.... some are apparently out of a Audi 100, however the fascia plate is alot bigger on most of them
will post pics tomorrow!!!Comment
-
The centre front console on some models with aux gauges are different, hence different width aux gauges
Why? don't forget, some models weren't quattro, some FWD front centre consoles are slimer due to a slimer transmission tunnel
HTH's
Jas..2001 Avus Silver B5 RS4.
2004 A4 Avant 1.8T quattro Sport-LE.
1995 S2 Coupe - sold (sniff)Comment
-
ahhhh.... that might explain it.... also I noticed that some of the gauges seem to be older ..... i.e the paint on the fascia is peeling off??Comment
-
Peeling white faces is a common thing.
If you went as far as to try and scrape the black paint off the gauges ring (trim around each gauge) you'll find early ones were metal, later plastic.
They were changing all the time it seems.
Jas..2001 Avus Silver B5 RS4.
2004 A4 Avant 1.8T quattro Sport-LE.
1995 S2 Coupe - sold (sniff)Comment
-
are you sure the bracket is sitting right James?
I spent ages fiddling with mine to adjust it when i refitted my interior, there is quite a bit of movement between the fixing points depending on how the dash sits etc, although yours does look too wide which is odd
i've not noticed a difference between my fwd and quattro coupes, but they are both B3Panthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 AvantComment
-
100% its a good 20mm to wideare you sure the bracket is sitting right James?
I spent ages fiddling with mine to adjust it when i refitted my interior, there is quite a bit of movement between the fixing points depending on how the dash sits etc, although yours does look too wide which is odd
i've not noticed a difference between my fwd and quattro coupes, but they are both B3
Cheers JamesChefComment
-
Dims...
James,
got my gauges out, the actual part no. on the metal bracket is 893 863 159, at the mounting arms the dim. is approx. 220mm @ the back set of holes, the front set are 210mm.
Any diff. to yours?Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
Morning...
You up yet...James?
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
Comment