Both bits, the metal back section and the plastic front cover.
Thanks.
Thanks.
-
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.uk -
Carl i have 3B bits here some were....you can have them!Chef -
Thinks...
ABY only i think, to go over the tensioner wheel i'm trying to fit...unless 3B is exactly the same
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
You are going to be running wide belt yes?ChefComment
-
The back section is also plastic, just the lower part by the lower cam gear is in metal IIRC.
I have all the parts but I live where I live so
If you can't find any, I will try to check what shipping would be. I guess around 20-25£ for shipping.
2004 9-5 aero
2009 Subaru Legacy Diesel
1994 Toyota Supra Eurospec 6-spd LHD
3-4 Audis in parts
Comment
-
25mm...
hopefully...but that's a long story...
Nobody else on here 'cept from Prosty...thanks...i'll check prices with Vagparts.Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
you can not run a cover with the wide belt
ChefComment
-
Wot...
not even with a little 'fettling' so to speak...would like to keep the oem look...
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
You can cut out for the wide belt. But the cam gear will still be visible. it would be like just using the frame. it will protect the timing belt anyway2004 9-5 aero
2009 Subaru Legacy Diesel
1994 Toyota Supra Eurospec 6-spd LHD
3-4 Audis in partsComment
Comment