JE oversize pistons or similar.

[gnutz2]

Anybody know of a fast UK supplier of JE pistons?

Or maybe someone has a set i can borrow until a new set arrives

No 3 piston has melted on my engine

[quattro]

Just call them direct, they will sell them to you. all you need is the piston dimention!

0017148989763, International dialing code is there all ready!

What happened?

[aelred]

I have some 81.5mm bore

[gnutz2]

Dont think 81.5 will do it, i need to get the block to the machine shop so they can measure it as the bores are burnt aswell.

It could be a new block.




98ron fuel with addative, 1.7 bar boost at 6500 rpm, with very rich mixture. I have it all data logged.

[pixsaudisex2]

oops.. sorry to see that.

[Mark Halligan]

98ron fuel with addative, 1.7 bar boost at 6500 rpm, with very rich mixture. I have it all data logged.

What do you think caused it?

[Rusty]

Nightmare

[gnutz2]

What do you think caused it?

I think three things.

1/ No 3 could be running leaner than all the other cylinders.

2/ The engine overheated which would meke sense as its the middle cylinder.

3/ Dodgy injector.

[dubmeister]

I think three things.

1/ No 3 could be running leaner than all the other cylinders.

2/ The engine overheated which would meke sense as its the middle cylinder.

3/ Dodgy injector.

Get your injectors checked!!! before it goes back together- I see a lot of problems with high power turbo motors with injectors that are running lean or have a poor spray pattern.

I think this may be the closest ANSU dealer to you. I have a older, lesser system in work. but these systems are the dogs....

http://www.injectorcleaning.co.uk/index.htm

HGL Motors
100 Sculcoates Lane
Hull
East Yorkshire
HU5 1EE

Tel: 01482 445566 (Monday - Friday. 10am-2pm)

HTH

Love the car by the way

[dubmeister]

Anybody know of a fast UK supplier of JE pistons?

Or maybe someone has a set i can borrow until a new set arrives

No 3 piston has melted on my engine

JE Pistons UK tel: 0845 3459755

http://www.je-pistons.co.uk/index.php

Give them a call direct and they will let you know the stock situation