Where to buy poly bushes

[mikeraz1]

Where is the best place to get some the polly bushes for the wishbones on the CQ.
Thanks
Mike

[Error404]

Depends what you want and which wishbones.

Superflex do them for the pressed arms, but not the forged arms, Powerflex do both, 034 also sell some too. Then theres alloy bushes if you want to be more hardcore/track orientated

[stiglet]

Can you get alloy bushes for the wishbones?

Worth noting the 034 ones are much tougher than usual too. They use Delrin instead of Poly.

[4WheelDrifter]

Can you get alloy bushes for the wishbones?

Yes. Unfortunatley for some.

[UUUdirs2newcastle]

Powerflex

See Julian at BALANCE MOTORSPORT. He is awesome at product knowledge, say I (fraser) reccomonded you and i get a free toaster! lol He got all my Bilstrin, H&R and powerflex stuff!

[volcano rs]

Can you get alloy bushes for the wishbones?

Worth noting the 034 ones are much tougher than usual too. They use Delrin instead of Poly.

i wouldn't use alloy wishbone bushes ,you need some sort of flex in that department .

[mikeraz1]

See Julian at BALANCE MOTORSPORT. He is awesome at product knowledge, say I (fraser) reccomonded you and i get a free toaster! lol He got all my Bilstrin, H&R and powerflex stuff!

I've just been on the BALANCE MOTORSPORT website and think I'll probably go with the powerflex bushes from them.
Thanks
Mike

[Error404]

Err, unless you get new arms too, £173 for Powerflex bushes is NOT a good deal
In fact its well over £100 more than the retail price. VAGParts have these on the shelf, they are not made to order either

http://www.balancemotorsport.co.uk/p...ecnumber=26937

[stiglet]

i wouldn't use alloy wishbone bushes ,you need some sort of flex in that department .

Not planning on doing it, just curious is all possibly for future if i ever go mental extreme. Incidentally have you had these installed yourself? What problems does it cause (provided you're not hitting curbs every day)?

[volcano rs]

Not planning on doing it, just curious is all possibly for future if i ever go mental extreme. Incidentally have you had these installed yourself? What problems does it cause (provided you're not hitting curbs every day)?

i haven't but somebody else did on the forum and snapped their wishbone and nearly damaged themselves .cant remember who though.

[Error404]

That was with pressed wishbones IIRC, and the arm sheared off near the bush on one side

might be ok for purely track use with the stronger forged arms IMHO.

[s2martyn]

i found that larkspped at leeds was cheapest for powerflex