Wanted - High pressure hydraulic hose.

[s2_bo]

My RS2 has just blown the hose from the Hydraulic pump to the Bomb.

Part number is: 895 612 065 B
This is the same part as the S2 as well.


If any one has one spare that they could send me then id really appreciate it.

Money waiting.

Cheers.
Bo

[quattrostyle]

I'll have a look for you Bo, maybe I've got a spare one

[s2_bo]

thank you

[K Simmonds]

I may well have one as well, will have a look tomorrow.

[A80Avant]

im in need of that.leaking but not too much.I plan to get it new(i know 145GBP) from VAGPARTS along with a new bomb.Its expensive but i only want to have this one done again once and if it holds for another 10 years,then im a happy guy!

[Bruno]

I had the same problem on my Rs2.
This hose was very expensive from my local Audi dealer.
I used the truck workshop on my job.
They have equipment for making hydraulic hoses for fork lifts and digger, excavators.
It took 5 minutes and is was free

My RS2 has just blown the hose from the Hydraulic pump to the Bomb.

Part number is: 895 612 065 B
This is the same part as the S2 as well.


If any one has one spare that they could send me then id really appreciate it.

Money waiting.

Cheers.
Bo

[s2driveruk]

yep, pirtek or similar places will make them up and for a fraction of the price of oem if u get stuck

[quattrostyle]

I can't seem to find a part number on the hoses but is the one you need on the picture?

[s2_bo]

Hello,

No sorry the one i need looks like this:

IMG_1384.JPG

Thanks anyway

If any one's got one i could buy please let me know.

Cheers.
Bo

[quattrostyle]

your welcome, good luck with the search

[s2_bo]

Bump....

Still looking for one of these hoses and could do with one ASAP as the car is not drivable because of the current problem.


Thanks for the advice on getting a new hoses fabricated, I'd like to use OEM parts for this though if possible.

[Pirvu Eugen]

Go to a high pressure hose shop and rebuild your hose using the oem ends....
Much cheaper then oem and in few minutes is ready.
Hope this helps!

[s2_bo]

Go to a high pressure hose shop and rebuild your hose using the oem ends....
Much cheaper then oem and in few minutes is ready.
Hope this helps!

Thanks i will try that.

Cheers.
Bo

[terrybullwon]

Thanks i will try that.

Cheers.
Bo

Bo,

Try speed flow, i know they are only high pressure banjo fittings at the end of the day, they could make you a nice shinny braied one up

[Pirvu Eugen]

Good luck!
Is only the hose they will exchange.... the ends they reuse...
The only thing to tell them is the position off the fittings in relation to each other.
Success!