wanted air temp sender

[RoadKill]

air temp sender that gos in the Inlet Manifold , al so temp senders that are in the water Manifold , my cars not boosting right , very bad when its hot , know codes on the ecu some im gessing its one of the 3

best say its a 3b

[UrS4boy]

Not sure what your question is but these *might* help you:

http://forums.audiworld.com/s4s6/msgs/148742.phtml

and

http://forums.audiworld.com/s4s6/msgs/148740.phtml

[RoadKill]

my post is in the wanted page better put that up the top

[lind4hl]

i got the same code on mine when only 0.7bar on the rs2, it was the dump-valve that was extremely atmospheric

[RoadKill]

replaced maf, dump valve, n75 , tryed dirront ecu , new nock sensors , lamder, still the same

[aelred]

Is temp sensor the plug in or soldered version as I have one with the plug and have the water temps

[lind4hl]

ohm measure the temp sensor, and post it here

[quattrostyle]

may I hi-jack this thread a bit?

My inlet temp sender got stuck today and is broken now, the piece between the two pins is missing, I got the soldered version, is it repairable?

[RoadKill]

i have the soldered one , pm me a price for the water temps

[RoadKill]

i now have a plug one with a plug to go with it , thanks for helping me out with that mark