girling twin pots

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • chunkymunkey003
    S2Forum Tinkerer
    • May 2009
    • 7
    • Country: England

    #1

    girling twin pots

    hi, looking for some for my G60 golf, been pointed in this direction by someone on dubforce

    any condition taken, also quick q'.

    what wheels can you run over these?

    ta, matt
  • Big Lee M
    S2Forum Fiend
    • Jun 2007
    • 2571
    • Country: England

    #2
    That will be me then. Welcome along........
    Just some finishing touches to do now

    Comment

    • Rusty
      Super Moderator
      • Jun 2004
      • 18953
      • Country: United Kingdom

      #3
      I think you run them with 280s (S2 is 276) so should work with 15s. G60s were fitted to Audis with 15" or larger wheels.
      Cheers'en, AndyC
      1994 ABY Coupe - Projekt Alpinweiss

      Comment

      • Big Lee M
        S2Forum Fiend
        • Jun 2007
        • 2571
        • Country: England

        #4
        Yeah you run them with the 280mm g60 disc all just bolts on. I had them on my Mk2 VR6. They stop quite well on a lite car such as a Mk2.
        Just some finishing touches to do now

        Comment

        • GazzaG60
          S2Forum Freak
          • Mar 2007
          • 4133
          • Country: United Kingdom

          #5
          thats correct. bolt on. needs a 15 with a bit of clearence though. like golf/corrodo G60 wheels.

          not much over the standard corrado G60 setup though power wise.

          if you need better then i can recommend the wilwood 4 pot with 310mm discs. superlite kit i think it is. needs 17" though. maybe a good clearence 16". they worked well.

          Comment

          • Rusty
            Super Moderator
            • Jun 2004
            • 18953
            • Country: United Kingdom

            #6
            314s and Monoblocks on the S2 worked with 16" Avus so 310s might be OK with 16s.
            Cheers'en, AndyC
            1994 ABY Coupe - Projekt Alpinweiss

            Comment

            • GazzaG60
              S2Forum Freak
              • Mar 2007
              • 4133
              • Country: United Kingdom

              #7
              its how close the brake mounts to the wheel face as we all know. there is sod all clearance. i had 17" bbs Rc's on my corrado and there was not too much between spokes and caliper.

              on the audi i have 18" bbs rc's now but used to have bbs RS2 in 17" with both i got about 1 inch between the gt2 6 pot and the wheel spokes. it was the inside of the wheel which was close on the 17" with the 6 pot,. over the 993tt disc so a little over the 310mm.

              Comment

              • chunkymunkey003
                S2Forum Tinkerer
                • May 2009
                • 7
                • Country: England

                #8
                cheers, i did think they would go over 15's as i knew they go on 280mm discs, i just spotted someone mentioning how much bigger they are and didnt want to shell out to find out they didnt fit, opinions off people who knew is what i wanted.

                15's is what im looking at running, BBS RZ's to be precise, i cant stand 17's on mk2 imo.

                so does anyone have any for sale? lol

                Comment

                • chunkymunkey003
                  S2Forum Tinkerer
                  • May 2009
                  • 7
                  • Country: England

                  #9
                  forgot to say, cheers Lee forgot your username and cba going back to look lol

                  Comment

                  • Big Lee M
                    S2Forum Fiend
                    • Jun 2007
                    • 2571
                    • Country: England

                    #10
                    I run mine under 15" RM's. Easy fit.I think BBS have good clearence a few people i know run them on BBS's and not even split rims and no problems at all.
                    Just some finishing touches to do now

                    Comment

                    • Dpicariello
                      S2Forum Maniac
                      • Mar 2006
                      • 621
                      • Country: United Kingdom

                      #11
                      Hi,

                      I have the original calipers fro my S2 available. I was going to clean them up before selling them but they're in pretty good condition.

                      PM me if you want them

                      Dan

                      Comment

                      Working...