NEED AN-Idle Control Valve Coupe 2.0 16v 1993

[lagz33]

As per title, let me know

[s2_bo]

Is that a Hitachi part?
Have you got a part number? i may have one.

[lagz33]

Wudve bin a good idea to check, will let you know tomorrow. Cheers mate

[GazzaG60]

think i have one. its off a 6a.

[lagz33]

Number on the actual Valve is 048133455
Hope that narrows it down, thanks guys

[GazzaG60]

whats your engine code?

[s2_bo]

I did find it today but forgot to bring it back here. I will check for you again tomorrow if your ok to wait.

[lagz33]

Erm i THINK its ACE, k-Jetronic??
Not too sure Ive got a post somewhere with a picture of my engine bay, with metering head and fuel lines etc

[spink]

these are the same as what are fitted to loads of 1990s audis including all S2s,late 7a's and loads of humdrum models.

[lagz33]

Thanks Spink, with that, anybody got 1 for sale ???

Also, do they tend to fail???? Im replacing to try and fix a cold start fault

[GazzaG60]

have you looked at the warm up regulator or the cold start injector?

[jameswkr]

Costs about £25 from a breaker. My grotty looking s.hand one works better than the original.

[lagz33]

Havent looked at those parts no, would I need to replace them? I was told by euro it doesnt have a warm up regulator...

Anyone thats got parts I could replace let me know.

At the mo, from cold start takes 3 attempts for it to get it actually ticking over, then takes a minute to warm up till its revving clean and drivable.

ALTHOUGH, my differential pressure reg has been unplugged for ages because of a previous idle problem which dissapears when unplugged (WHEN WARM)
YET when cold if its plugged in starts first time and has much more power, but only till its warm then starts cutting out.

:S

[lagz33]

Anybody?

[lagz33]

Bringing this back to life as last one i bought through here didnt come through in the post
Somebody please help!!! Im starting to stall randomly driving around.