Standard ABY coupe Suspension

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kingfishers2
    S2Forum Maniac
    • Feb 2007
    • 756
    • Country: United Kingdom

    #1

    Standard ABY coupe Suspension

    Anybody got some lying around?
  • Rocco
    S2Forum Zealot
    • Aug 2007
    • 6393
    • Country: Spain

    #2
    it is not the same as the 3B coupe suspension??

    because i got the 4 3b stock suspension for spare
    RED Mitsubishi Lancer Evolution VI TME nº 16 of 250
    BLACK Mitsubishi Lancer Evolution VI TME nº 189 of 250
    LWB Audi Sport Quattro project

    Comment

    • kingfishers2
      S2Forum Maniac
      • Feb 2007
      • 756
      • Country: United Kingdom

      #3
      i think the hub bolts are smaller on the 3b, i had a bit of a nightmare trying to roll an ABY on cq suspension, i think the 3b shares the same struts as the cq.

      Comment

      • K Simmonds
        S2Forum Zealot
        • Dec 2007
        • 7627
        • Country: Wales

        #4
        Only the very early 3B's had the 12mm strut bolts. They were all supposed to be recalled and replaced with 14mm hubs struts bolts ect. That said I have seen 3B's with the 12mm bolts still in place. The 12mm struts can be drilled out to 14mm they are then the same. 3B and ABY springs are interchangeable but are slightly different, ABY being 10mm lower I think.
        1990 B3 2.0 80 quattro.
        1992 C4 2.8 Avant quattro
        1994 MTM RS2.
        1998 B5 TDI quattro Sport.
        2000 B5 TQS.

        Comment

        • Rusty
          Super Moderator
          • Jun 2004
          • 18953
          • Country: United Kingdom

          #5
          And the front struts are 52mm vs. 50mm i.e. it's pretty much all different (but not by much).

          Spink is breaking an ABY coupe, that will yield what you require
          Cheers'en, AndyC
          1994 ABY Coupe - Projekt Alpinweiss

          Comment

          • Alam
            S2Forum Hobbyist
            • Jan 2009
            • 18
            • Home: United Kingdom

            #6
            Originally posted by K Simmonds
            Only the very early 3B's had the 12mm strut bolts. They were all supposed to be recalled and replaced with 14mm hubs struts bolts ect. That said I have seen 3B's with the 12mm bolts still in place.
            Cars were recalled and replaced with stronger M12 bolts. Audi then changed the design to M14 around the middle of 1992 across the range, not just the S2.
            The info on the recall is still on VOSA's website ►► Link

            Comment

            • LHD_Kid
              S2Forum Possessed
              • May 2006
              • 3695
              • Home: England Current: Belgium

              #7
              Originally posted by s2pearl
              i think the hub bolts are smaller on the 3b, i had a bit of a nightmare trying to roll an ABY on cq suspension, i think the 3b shares the same struts as the cq.
              Maybe, but not the same inserts..... CQ and 3B S2 inserts are very different.....
              Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
              S2 Coupe... bit easier off the line...
              '03 ZX12-R daily hack.... lots of nice bolt ons...

              Comment

              • Sonic
                Administrator
                • Jul 2006
                • 5514
                • Home: United Kingdom Current: England

                #8
                Originally posted by s2pearl
                Anybody got some lying around?
                I think the rear shocks were leaking oil when they were removed though.
                S2Forum.com Administrator

                Comment

                • kingfishers2
                  S2Forum Maniac
                  • Feb 2007
                  • 756
                  • Country: United Kingdom

                  #9
                  @sonic

                  They will be fine i just need to get the chasis moved so we can work on my bros car how much for the set?

                  Comment

                  • K Simmonds
                    S2Forum Zealot
                    • Dec 2007
                    • 7627
                    • Country: Wales

                    #10
                    Originally posted by Alam
                    Cars were recalled and replaced with stronger M12 bolts. Audi then changed the design to M14 around the middle of 1992 across the range, not just the S2.
                    The info on the recall is still on VOSA's website ►► Link

                    http://www.dft.gov.uk/vosa/apps/reca...hes/search.asp
                    Doh, it's not often I get something wrong. Thank you for clarifying that.
                    1990 B3 2.0 80 quattro.
                    1992 C4 2.8 Avant quattro
                    1994 MTM RS2.
                    1998 B5 TDI quattro Sport.
                    2000 B5 TQS.

                    Comment

                    • Rocco
                      S2Forum Zealot
                      • Aug 2007
                      • 6393
                      • Country: Spain

                      #11
                      Originally posted by s2pearl
                      i think the hub bolts are smaller on the 3b, i had a bit of a nightmare trying to roll an ABY on cq suspension, i think the 3b shares the same struts as the cq.
                      my coupe spare parts it´s from July of 1992 year
                      RED Mitsubishi Lancer Evolution VI TME nº 16 of 250
                      BLACK Mitsubishi Lancer Evolution VI TME nº 189 of 250
                      LWB Audi Sport Quattro project

                      Comment

                      • vonbeck
                        S2Forum Fiend
                        • Feb 2004
                        • 2455
                        • Country: England

                        #12
                        iv`e a full set [front and rear shocks] only done 60k
                        ABY Cricket Green Pearl Coupe, blk leather
                        THE ONLY TROUBLE WITH DOING NOTHING IS KNOWING WHEN YOUR FINISHED!!!

                        Comment

                        Working...