Wanted 10mm hubcentric spacers

[iDub]

I'm after a pair of 10mm hubcentric spacers for my Avant. Bolts aren't required, as I've already got some. Must be hubcentric, not the horrific wobble-inducing things like I've already got

[Jamo]

10mm hubcentric you might have to have made, normally only 15mm and above are sold hubcentric or you'll have to pay megabucks for H&R ones. Speak to bambridge.

[Tonks4x4]

Get them from this forum member....

Link to Bambridge

To quality items...

[bambridge]

10mm hubcentric

PM Sent,

thanks guys

[iDub]

Just PM'd Kev back.

Not actually whether 10mm hubcentric will fit or not now. Pretty sure the centre bore sticks out more than 10mm. Can anyone confirm?

[s2avant]

The front and rear spigots on an Avant are more than 10mm. The rear is nearer 20mm.

I have 15mm hubcentric on the front on the OE hubs and 10mm hubcentric on the rear with machined hubs. TBH my rear setup is a bit different to the norm as it has to accomodate my rear brake setup. You can see pictures in this thread.

Ben

[Sweeper]

I have 4x new 20mm ones with longer bolts for sale . Company is fun tech . Made from aluminium.

[M_GORDON]

The front and rear spigots on an Avant are more than 10mm. The rear is nearer 20mm.

I have 15mm hubcentric on the front on the OE hubs and 10mm hubcentric on the rear with machined hubs. TBH my rear setup is a bit different to the norm as it has to accomodate my rear brake setup. You can see pictures in this thread.

Ben

Without that, is impossible

I have some of 10mm without hubcenter

[mcandmar]

H&R make two different 10mm hubcentric spacers that fit, part numbers 2055571 and 20555712.

[johne]

Philip Walker on here sells 10mm hubcentric spacers. I bought a set from him, not cheap but very nice quality anodised aluminium. He also sells on ebay under pw-motorsport. He'll sell them with or without the bolts.

John

[M_GORDON]

Our hub has more than 10mm. it´s around 13mm
It´s impossible fix one spacer with 10mm and hubcentre

[johne]

Our hub has more than 10mm. it´s around 13mm
It´s impossible fix one spacer with 10mm and hubcentre

No, it's not, I've got them on my car, see my earlier post.

John

[s2avant]

No, it's not, I've got them on my car, see my earlier post.

John

Have you got pictures of this? I can't see how you can get a 10mm spacer to be properly hub centric when the existing spigot is deeper than 10mm

I use 15mm on the front of mine and they can be fitted without modding the hubs. On the rear of an Avant there is no way a 10mm hubcentric can fit.

Ben

[iDub]

From what I can gather, there's a slight taper on the leading edge of the centre bore and this can probably be integrated into the spacer, though there won't be much material there! I'm waiting for a spare moment so I can get out there with a tape measure to see if I can get away with 15mm.

Johne - Cheers for the info - I'll give Philip Walker a shout. Have you got any pics?

[johne]

Give me a couple of hours to get the car in the garage & I'll post some pictures.

In the meantime see ebay item number 310186302616.

John