Wanted: 5 stud hubs for my 90Q

[simyboye]

Hi there,
I have a 90Q thats having an S2 ABY conversion and I really need to think about going over to 5 stud for calipers/ discs etc for a porsche brake conversion.

Does anyone have any?

Any ideas if I need to change the driveshafts too? Or just the hubs...

Any advice, intel etc greatly appreciated.

James

[avants2turbo]

Hi there,
I have a 90Q thats having an S2 ABY conversion and I really need to think about going over to 5 stud for calipers/ discs etc for a porsche brake conversion.

Does anyone have any?

Any ideas if I need to change the driveshafts too? Or just the hubs...

Any advice, intel etc greatly appreciated.

James

ive got a set of 5x112 s2 avant hubs and hub carriers and all 4 driveshafts and prop if its any good to you

[PeteUr]

He'd need to upgrade box and diff to match plus uprights as well if he went that route unfortunately. the strut to hub bolts are different from a b3 to a aby/avant, different size. The prop's also different in length.

[avants2turbo]

i also have 6 speed box and torsen, and also the complete rear end (subframe, diff, wishbones) no struts though

[PeteUr]

Its a b3 car so would need the parts from a 3b/aby coupe to fit

[JMLAudi]

Changing To 5 Studs

hI

I dont know if a F reg Audi 90 quattro is same as yours,but, at the rear my rear drive shafts of the Audi 90 mated to S2 rear hubs ok.................in the front i used flanges off an 2OV gearbox /and front bearing housing(complete strut assenmbly),and S2 driveshafts.

The rear discs( 5 stud) work ok with the rear brake calipers/carriers.


Hope its helpfull
cheers
john