Wanted - Rear Outer CV joint.

[4WheelDrifter]

I've got a rear outer CV joint with a little play in it. Before I splash out on a new one, I just wondered if anyone has a good one going spare?
The other joints seem fine, so they're obviously quite durable.

I'm struggling to see a part number on the thing ATM, but I believe 3B, ABY and V6 Coupés share the same joint. I may have to do a little more cleaning to double check.

[rj scotty]

I have a complete rear (avant) shaft in the garage with a worn inner joint.

May be of use ?

cheers

rich

[4WheelDrifter]

Thanks, but I'm not sure if an Avant one will fit.
I can just make out what I think is 893 407 305 H on my original joint.

[andyg plym]

stu if you find your parts off an old nacker let me know as i need a rear calliper for my coupe

[4WheelDrifter]

I've got lots of parts from my old knacker, thanks. What side caliper do you need?

[andyg plym]

rear drivers side. need it for mot. got to get new rear pads and siscs too as mine are down to a fag paper width

[4WheelDrifter]

I'll see what I can find. Old rear calipers are quite often knackered though.

[andyg plym]

cheers stu. on mine the piston sleeve is feked and piston itself almost solid

[s2_bo]

What are you still doing at home stu. The curry is waiting!

[Error404]

CQ20v ones should fit too

[4WheelDrifter]

As long as it's from a post March 1990 cq20v. I'm not sure on the early ones. No doubt there's a few other Audis that share the same joint.

Thanks for the curry Bo. A sweetener for that up-coming clutch job, eh?

[s2_bo]

Great minds think alike...

[4WheelDrifter]

A Coupé rear outer CV joint is still wanted. Before I order a new one.

[Knight Rider S4]

I have one off 3B I stripped ...PM me if you want it

Cheers


Steve