Wanted: Breather assy

[AndersS2]

Partnummber: 054103129 "Breather assy"

Need this breather assy for the block. Prefer new, but thats probobly NLA
Anyways, PM me if you have one (with the o-ring on the backside)

picture of my old one which is kaputt:

[AndersS2]

I read somewhere that these come new with a pre fabricated tension in them (for proper sealing), so a new one is preferd. Anyone knows if they still are available (have not checked with my own local supplier) form the stealers?

[terrybullwon]

I brought a new one when i built my engine Anders, they are a metal replacement part.

[AndersS2]

Ok, thanks James!
I will order it when I have the time then

cheers,

[AndersS2]

I brought a new one when i built my engine Anders, they are a metal replacement part.

Any particular way you put it on the block James?
I have beaten my new assy to the death as I cant get it in, so now I need another one.

I noticed a small gap on lower innerside of the assy, and by the looks of it I fitted it on the lower side first, then pushed/knocked it carefully in on the top side. But that did not work.

Does it say anything in the bently manual or so about how to install it or have I got a oversized part that just wont fit?

cheers,

Anders mit da hammer

[terrybullwon]

Um.... Mine Just pushed in mate, tap with a rubber hammer and the job was done

[AndersS2]

Um.... Mine Just pushed in mate, tap with a rubber hammer and the job was done

Yeah I did that, but aparently it isnt supposed to be that easy
I will try some more with a new one. Thanks for confirming it for me James.

[terrybullwon]

Try removing alittle surface rust with some 600 grit sand paper maybe a few rough edges stopping it?