Wanted: 4x10mm spacers

[prosty]

For my RS4, must be with hub guide (or whatever it's called)

Just write here or PM me if you know any for sale

[Error404]

you might struggle to find 10mm hub-centric spacers mate, as there is not enough material to make the hub-centric part from if that makes sense?
I am looking for some too.

[mcandmar]

H&R 2055571 or 20555712

The first part number 571 has the larger overall diameter, and is just a tiny bit larger than the A8 disk / S8 wheel hub. The second part number 5712 are smaller in diameter than the disks / wheel hub and dont look right. From memory the 5712 is listed for Audi A6's, and the 571 part is listed for Mercs.

[prosty]

H&R have 8mm hubcentric as their thinnest spacer, I've seen several other hubcentric on ebay with 10mm, going for those if I don't find a better deal with two used pairs.

[Bizzas]

U have PM........................

[Error404]

good info

Anyone want to trade 2 x 15mm hubcentric spacers for 2 x 10mm ones?

[bambridge]

The problem i have found with making 10mm spacers is that the 57.1 spigot that protudes from the hub on most audi,s is 13mm long on some vws its 16mm long.

On a 10mm spacer if you machine the 57.1 bore to deep ie 13mm deep the hubcentric the material will be very thin and could fall off???

some manufactures will put a very large chamfer on the huncentric part that fits into the wheel to add more thickness to this part of the spacer!

[YELL MAN]

Anyone know if the prices on the H&R website are for a pair or for a whole set?

[fish]

www.manton.se prosty. he will make you custom spacers quite cheap.