WANTED - MTM or Audi Sport S1 Exhaust Manifold

[UUUdirs2newcastle]

Has anyone a new or used unit for my MTM conversion?

Thanks

[UUUdirs2newcastle]

Still looking!

[Jamo]

Why not use the new Wagner SQ manifold instead when it comes out?

[Billman]

Cause mtm rocks!!! :-p

[Jamo]

Cause mtm rocks!!! :-p

The MTM manifold? have you seen one the ports are small and I wouldn't use one over say the RS2 EVO manifold.

I've physically examined one and whilst it's an improvement over the stock manifold time has moved on and better manifolds are out there

[Billman]

The one I have has no smaller port :-)

[UUUdirs2newcastle]

Why not use the new Wagner SQ manifold instead when it comes out?

I would love the Wagner SQ Evo manifold, but its only a T3 Flange, surely that will not fit my MTM KKK26 Turbo?

If I got that wrong, just say! lol.

Cheers

[A80Avant]

if you want the S1 exhaust manifold, then here it is. In stainless steel or inconel depending on your budget.

I still dont understand why you want to go down the mtm street which is overpriced and not as efficient but hey! Your choise!

http://www.br-racetec.ch/594.html

[A80Avant]

by the way, as you can see, one of the ports of the S1 is smaller in length(if that is what you mean) (cyl 4 and 3 comp. to cyl 1), so i dont see the big fuss about that.

[Rocco]

if you want the S1 exhaust manifold, then here it is. In stainless steel or inconel depending on your budget.

I still dont understand why you want to go down the mtm street which is overpriced and not as efficient but hey! Your choise!

http://www.br-racetec.ch/594.html

these prices are in €€€??

[quattrostyle]

no in CHF but still very expensive stuff.

[Jamo]

I would love the Wagner SQ Evo manifold, but its only a T3 Flange, surely that will not fit my MTM KKK26 Turbo?

If I got that wrong, just say! lol.

Cheers

Ah I see what you mean, might be better geting an OEM SQ manifold then

[Billman]

OEM SQ has K27 flange.

You will need either:

1. RS2 manifold cleaned up inside so you have less restriction

2. Wagner rs2 evo

3. Mtm for k26

Do you have the k26 10 turbine housing? Can you post some measurements for your turbo like compressor inducer diameter and turbine exducer?

[Jamo]

OEM SQ has K27 flange.

You will need either:

1. RS2 manifold cleaned up inside so you have less restriction

2. Wagner rs2 evo

3. Mtm for k26

Do you have the k26 10 turbine housing? Can you post some measurements for your turbo like compressor inducer diameter and turbine exducer?

Aronmatic2 did it with a K26 hotside

[Billman]

But he must machine the flange or buy an adapter. The adapter makes also a restriction I think.