clutch flywheel & needle roller baring

[MGaz]

I've recently acquired an AAN 20vt engine from a URS4, I'm wanting to fit it to my type-85 CQ.

for starters I've been told I will need the following items:

1 x UR (WR/MB) Flywheel and clutch (tho I've read that the 3B item is lighter, but I have heard conflicting opinions if it will work or not )

1 x Needle roller bearing to put into the end of my crankshaft

1 x 3B downpipe or custom made downpipe (apparently needs to be modified in some way to fit for my car? )

[MGaz]

bump.. (:

[spink]

I presume you are keeping the original cq box?if so

3b flywheel from a audi 200 20v will work fine, if you can find one as they werent sold in UK,it is different to what is fitted to a s2 3b(where needle bearing is in flywheel) and is a fair bit lighter than the boat anchor urq item

same flywheel is used on urq 20v and a fair few later 10v turbo 100/200s so isnt too hard to find from these,although when it is forsale off a urq 20v the price seems to quadruple

needle bearing from audi about £20 or thereabouts last time i checked