Coupe/S2/Cabriolet Lower Door Molding

[Acidburn]

v6 bumper is a straight bolt on, its the same as a s2 one providing it has the lip at the bottom, only difference is with some b3's some people notch the bumper where the lights brackets are to let it slide back, mostly on saloons.

[frostyflax17]

ooo... let me know if you get one of those. i'd love a v6 then.

[Acidburn]

Shippings the issue which is annoying otherwise I could tell you where there's at least 10 s2/v6 bumpers currently sitting.

[andy10v]

One thing if fitting a v6 bumper to an s2 is to remove plastic sheet on the back of the lower grills.

[Acidburn]

One thing if fitting a v6 bumper to an s2 is to remove plastic sheet on the back of the lower grills.

Good point

and for those swapping a s2 one for a v6 keep the washer jet hosing as could use it for water injection (well ghetto water injection ) as I know a few people are doing this.

[andy10v]

Hook it up to an intercooler spray bar

or just a pair of fine mist jets

[frostyflax17]

audibits2 is sending over my bumpers and stuff for a good price,

tell me where these bumpers are? and how much are they? and who is willing to go get one for me and send it to audibits!

[frostyflax17]

btw, what bumper is this?

http://forums.vwvortex.com/showthread.php?4373867-Photo-Shoot-Audi-S2-785-HK-803NM

it comes out a lot more in the front than others i've seen... love it.

[Acidburn]

s2 front bumper, same as v6 except you don't get the holes above the fogs which are for the washer jets

[frostyflax17]

that looks like a much larger area in front of the lights then other s2 bumpers i've seen. look at how aarons bumper sits, it only looks like 3-4 inches, vs the white one looks like a good 6 inches.

i guess i've never seen a s2 bumper in person lol. but damn i love that white rally car.

[frostyflax17]

so, still waiting to hear back from spink, if anyone else has a s2 bumper/ v6 bumper (preferred) shoot my some numbers!

also still waiting on that lower door molding

[frostyflax17]

got the bumper... still want the door strips!

pleeease?!

[cqfiend]

frostyflax17, the mldg part # is 895 853 959 A 01C and sells retail for $68.50 us.

the last I checked, they are still available from audi in the states.

[frostyflax17]

ok, that's for our drivers side it looks like, is the passenger side...

895853960A 01C

it seems i was shipped a drivers side, so i should get a passenger side one... though my drivers side is a bit painted over... not sure if i will keep it painted and paint the next, or strip it to match the rest. hmm