Wanted - RS2 Cams and tappets

[willg54]

Im looking for some RS2 Cams and tappets please!

Cheers

Will

[Rocco]

Im looking for some RS2 Cams and tappets please!

Cheers

Will

RS2 Camshafts??? are you rich? they are **** expensive¡¡

the camshafts from NM engines are "similar" and far easy to find at better price

[willg54]

ill save my pennies

cheers for the advice, ill take a look!

[willg54]

ive seen these nockenwelles on ebay for quite a while...any one know of them?

http://cgi.ebay.co.uk/AUDI-NM-5cyl-c...#ht_500wt_1156

[rs200]

so you want to say that NM cam are also good.. I have one pair at home and don't now what with them..

[willg54]

so you want to say that NM cam are also good.. I have one pair at home and don't now what with them..

you can give them to me

[Jamo]

so you want to say that NM cam are also good.. I have one pair at home and don't now what with them..

NM cams are very rare hold onto them, I run them in my stroker. The inlet that's got high lift as well as the exhaust.

alternatively run a pair of 7a but they have to be clocked to make sure you don't lose low end. see posts by Audi_CQ

[rs200]

NM cams are very rare hold onto them, I run them in my stroker. The inlet that's got high lift as well as the exhaust.

alternatively run a pair of 7a but they have to be clocked to make sure you don't lose low end. see posts by Audi_CQ

so I can put it in my car without any problem? they don't need to be reclocked?
do I need remap?
thanks..


P.S. now you give me reason for thinking. I thought that NM cam are useles , because everybody use RS2 or 7A cams,or even some custom cams..

[Dan]

P.S. now you give me reason for thinking. I thought that NM cam are useles , because everybody use RS2 or 7A cams,or even some custom cams..

Totally crap mate. You don't want them. You should probably just send them to me.

[rs200]

Totally crap mate. You don't want them. You should probably just send them to me.

AHHAHAHH

ok , give me your adres info and I will send it to you..

so do you have some info about NM cams?
what I have to do on car that they work propeetly ?

[driftin jo]

Why do you want RS2 cams ? An ABY with RS2 turbo , injectors can be chipped to ~380 HP
and and RS2 will not make any more power than this so in reality they don't do a lot apart form relive you of a lot of cash, better spent on something else IMO.

[jade]

ive seen these nockenwelles on ebay for quite a while...any one know of them?

http://cgi.ebay.co.uk/AUDI-NM-5cyl-c...#ht_500wt_1156

Hi, Tried buying from him before, He posts things here on the forum also, From what I saw he bids on his own stuff to push up the price

Beware !

[willg54]

Think i've decided on 7A exhaust cam for the replacement now. Will at VRS has a few sets and some followers.

@RS200, searching the forum will get you lots of data on the different cam characteristics. I've been reading quite a bit today!