WANTED 92.8mm 5 cyl crank.

[|CL|NIKI]

I need a 92.8mm stoker crankshaft for 5 cyl AAN/ABY.
Thanks

[Jamo]

http://www.s2forum.com/forum/showthread.php?t=52923

[|CL|NIKI]

Thanks allot.

[|CL|NIKI]

Help....

[mrt105]

i'm looking at getting a 92.8 throw crank for my 7a at the moment from here - http://eurospecsport.com/products/co...rankshafts.htm

[|CL|NIKI]

Done.

[Rocco]

Done.

Where?

[|CL|NIKI]

I goes with diesel block and crank but Eurospecsport got them. Djavat too.

[Rocco]

Diesel block + 92.8 crank? Are you looking for 9000 rpm?

[caterpillar]

Diesel block + 92.8 crank? Are you looking for 9000 rpm?

and really long conrods...158 or longer...and drysump...the s1 did have 85mm stroke...

[|CL|NIKI]

Diesel block + 92.8 crank? Are you looking for 9000 rpm?

Nop, but that is brilliant idea .
Will use diesel block and diesel 95.5 crank or 100mm crank from Eurospecsport.
158mm rods are perfect. 159mm are too much i think - the rod will be too close to the piston dome bottom - I need at list 8/1 CR. The pistons will be 83mm - maybe can fit 83.5mm too but.... dont want to push Me luck

[|CL|NIKI]

Diesel block + 92.8 crank? Are you looking for 9000 rpm?

How can I reach 9000 rpm without blowing the block or head every 5 km - just to go with solid mechanic lifters and hard springs, or something more?

[Rocco]

How can I reach 9000 rpm without blowing the block or head every 5 km - just to go with solid mechanic lifters and hard springs, or something more?

and the oil feed system?

expert people says that 7800rpm as much much much with stock oil pump ,but who cares....if you are not Fernando Alonso you dont need to rev more and get enough power stopping at 7500rpm is amazing with 600Hp car

[Rocco]

Nop, but that is brilliant idea .
Will use diesel block and diesel 95.5 crank or 100mm crank from Eurospecsport.
158mm rods are perfect. 159mm are too much i think - the rod will be too close to the piston dome bottom - I need at list 8/1 CR. The pistons will be 83mm - maybe can fit 83.5mm too but.... dont want to push Me luck

dont you need a 92.8 crankshaft then?

[|CL|NIKI]

dont you need a 92.8 crankshaft then?

I dont got 92.8mm crank - It wos hard to find that one.
Now,new from Eurospec is ok - they got it(before 1 year they haven't).