wtd; kkk26 hotside housing

[s2tommy]

i maybe in the market for a kkk26 hotside housing if anyone has one knocking about has i snapped my main shaft an found big cracks in my hotside yes after yesterday playing with a yamaha R6!!and i needed my hotside housing for my next hybird set up!! there are two sizes .6 and .8 in the hotsides and i need a .8
if anyone has one and wants to sell give me pm cheers tom

[avants2turbo]

that would be the hotside off a 944 turbo s then, good luck with that fella!

[andy10v]

I have a 56mm hotside, it comes attached to a 944 turbo if you are interested?

[avants2turbo]

is that the turbo or turbo s housing, the standard turbo housing is a #6 turbo s is #8, if its the turbo s, id be interested if the other fella isnt

[andy10v]

Roughly measures the Porsche exhaust wheel

Wide bit 64.5mm
Narrow bit 54.5mm

Housing is approx 56mm

[avants2turbo]

Roughly measures the Porsche exhaust wheel

Wide bit 64.5mm
Narrow bit 54.5mm

Housing is approx 56mm

how much, im interested

[Billman]

i am also looking for a K26-8 turbine housing. Only housing. There should be an 8 on the inside of it where the housing meets the exhaust manifold.

[K7ERG]

I might have one somewhere.