Audi 80/100/RS2 metal clutch slave cylinder dust boot

[andream88]

Hi all.

I have damaged my brand new slave cylinder dust boot during installation due to very tight spaces under there.

Does anyone have an old slave cylinder lying around i can take the dust boot from?

This is the slave i have:

http://www.ecstuning.com/Search/4A0_721_261/ES1453/

If you have one, please PM me.

Cheers
Andrea

[max_s2]

You can simply buy a new repair kit. I shouldnt cost more than 10 punds.

[PaulJ]

If you can get the boot off and clean it try superglue for rubber, done this before and the glue worked fine

Paul

[andream88]

You can simply buy a new repair kit. I shouldnt cost more than 10 punds.

Do you know where?

Cheers

[veneto rs2]

I had a look on Etka and there's no part number for the rubber boot itself.

Best thing to do IMHO it' to go to the scrap dealer and get a slave cylinder off from any Audi (C or B platform) and get yourself the boot off of it.

I know a couple of sfasci/scrap in Vicenza area where you can find plenty of Adui 80/100 etc etc


Stefano

[andream88]

I had a look on Etka and there's no part number for the rubber boot itself.

Best thing to do IMHO it' to go to the scrap dealer and get a slave cylinder off from any Audi (C or B platform) and get yourself the boot off of it.

I know a couple of sfasci/scrap in Vicenza area where you can find plenty of Adui 80/100 etc etc


Stefano

Many thanks Stefano.
Easier said then done though!
Will try with a couple scrapyards here in Padua...

Will keep you updated

In the meantime, if you find one, please let me know!

Cheers
Andrea

[andream88]

anyone?
still looking for this one....

[andream88]

c'mon guys.

PLEASE!!