-12AN Oil drain flange

[europeanme]

anyone have one kicking about or know of where these are for sale....

cheers
Mike

[Jamo]

You have to make one yourself, all off the shelf are 10an

[europeanme]

You have to make one yourself, all off the shelf are 10an

cheers for that....

[Jamo]

Is this for a CT? all you need are these or similar

http://www.ebay.co.uk/itm/T3-T34-T35...item4ab328c074

http://www.ebay.co.uk/itm/Garrett-T3...item5ae2a282eb

http://www.ebay.co.uk/itm/12-AN12-12...item2311dbd366

You will need to drill the bolt holes out to 10mm and buy UNC 3/8 socket head bolts about 1/2 inch

[europeanme]

Is this for a CT? all you need are these or similar

http://www.ebay.co.uk/itm/T3-T34-T35...item4ab328c074

http://www.ebay.co.uk/itm/Garrett-T3...item5ae2a282eb

http://www.ebay.co.uk/itm/12-AN12-12...item2311dbd366

You will need to drill the bolt holes out to 10mm and buy UNC 3/8 socket head bolts about 1/2 inch

it is for a CT...

cheers for the links...I must have spent an hour trawling ebay and didn't get much that made any sense...well, any sense to me...

stupid question, why would you drill out to 10mm whats wrong with the bolt hole as it is?....

thanks again Jamo...

cheers
Mike

[Jamo]

Your right it was a stupid question!

CT uses UNC bolts the standard bolt holes are 8mm UNC is about 9.5mm you need to make them 10mm to accept the UNC bolt

[europeanme]

Your right it was a stupid question!

you will not find anyone better than me for these!!....

CT uses UNC bolts the standard bolt holes are 8mm UNC is about 9.5mm you need to make them 10mm to accept the UNC bolt

so in theory I could use any thread...UNF might be an option....

I've just had a thought and there is a chance Repo might have done this, as the bolt heads looked quite big...I'll check....

[Jamo]

You what dude? UNC not UNF, btdt so has Bram and it's on the CT FAQ page

[europeanme]

You what dude? UNC not UNF, btdt so has Bram and it's on the CT FAQ page

unified fine and unified course threads.....the fine one will be more secure...not that it would 'let go' but I was just thinking "belt and braces" type of thing...

theres a CT FAQ page now!!?!?!?...

[Jamo]

Yeah but CT say use UNC but your going to use UNF and other CT owners use UNC? don't see the logic but if it works for you.

[europeanme]

Yeah but CT say use UNC but your going to use UNF and other CT owners use UNC? don't see the logic but if it works for you.

if thats the way its done, then UNC it is....

[terrybullwon]

I re-tapped my threads didn't see the point of not using metric bolts after all we are in the Uk

[Jamo]

I thought of doing the same but the bolts cost me 50p each from a local hardware shop

[terrybullwon]

Jamo running it old skool

[Jamo]

Your not going to bring up the age related license thing again?