Wanted MC 10V Turbo Flywheel

[RS2]

Wanted for a project,

MC Code 10V Turbo 240mm Flywheel (and clutch if you have one).

Also looking at other 240mm flywheels which have a depth (inc clutch) of no more than 75mm from the engine block. This is to fit inside a slim bellhousing in my project.

Thanks

07989 333437
syncro16@hotmail.co.uk

MG

[re2500]

I have a NG 10v flywheel and a barely used LUK clutch in my garage, i dont know if theyre the same? I can measure the flywheel diameter?

[caterpillar]

you need the thicknes or P/N.. the diameter are all the same

[RS2]

It's to go into a thin bellhousing... similar to the old 016 setup but has to take hp of an AAN.

I've used an MC before and it works as it's a 240mm clutch.

What size clutch is on your NG flywheel?

MC Flywheel is 034.105.270.M (or MX)

Thanks

MG

[RS2]

Anyone?

Measurement is 75mm from crank case to outside of clutch pressure plate.

MG

[RS2]

Ad edited to include any other 240mm early 5 cylinder flywheels...

Anyone?

MG