Announcement

Collapse
No announcement yet.

A hydraulic pump to steering rack hose for a LHD ( help needed from European member

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • A hydraulic pump to steering rack hose for a LHD ( help needed from European member

    Need help urgently so I can get my car on the road, as its my daily....

    I need to source A tandem pump to steering rack hose for a LHD, for a servo conversion

    There are 2 types I have seen that will work one with vertical loops that fit behind the servo or one that has its loops horizontal That will fit under it

    If anyone has something like this lying around or can tell me what models a hose as above could be found please advise



    Regards

    Wayne
    Last edited by jade; 18 October 2012, 14:19.
    RS 2 580HP

  • #2
    Anyone ?
    RS 2 580HP

    Comment


    • #3
      Originally posted by jade View Post
      Need help urgently so I can get my car on the road, as its my daily....

      I need to source A tandem pump to steering rack hose for a LHD, for a servo conversion

      There are 2 types I have seen that will work one with vertical loops that fit behind the servo or one that has its loops horizontal That will fit under it

      If anyone has something like this lying around or can tell me what models a hose as above could be found please advise



      Regards

      Wayne

      Anyone please !!!
      RS 2 580HP

      Comment


      • #4
        I doubt that the vertical looped one will work. The space between the firewall and the servo is minimal and you could definitely get rattle if it actually fits.

        sent with Nokia 6210

        Comment


        • #5
          Originally posted by A80Avant View Post
          I doubt that the vertical looped one will work. The space between the firewall and the servo is minimal and you could definitely get rattle if it actually fits.

          sent with Nokia 6210
          Saw that one on a Audi 80 with a servo fitted as original
          RS 2 580HP

          Comment


          • #6
            I see.
            Make sire you get the same servo then to be able to fit. Also part numbers would be useful so that more people can look for you

            sent with Nokia 6210

            Comment


            • #7
              Originally posted by A80Avant View Post
              I see.
              Make sire you get the same servo then to be able to fit. Also part numbers would be useful so that more people can look for you

              sent with Nokia 6210
              Yes part numbers are the problem at the moment if I knew I would just go to audi and order one to get the job done, very few old audi's here to look at
              RS 2 580HP

              Comment


              • #8
                I have posted the part number of the horizontal one on the other thread but that one is nla

                sent with Nokia 6210

                Comment


                • #9
                  Something like this hose.png
                  RS 2 580HP

                  Comment


                  • #10
                    Yup

                    sent with Nokia 5110

                    Comment


                    • #11
                      Originally posted by jade View Post
                      Something like this [ATTACH]38759[/ATTACH]
                      Anyone ?
                      RS 2 580HP

                      Comment


                      • #12
                        I have pmed you a link.

                        sent with Nokia 5110

                        Comment


                        • #13
                          Originally posted by A80Avant View Post
                          I have pmed you a link.

                          sent with Nokia 5110
                          Got it
                          RS 2 580HP

                          Comment

                          Working...
                          X