Aslo o/s headlight needed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • PhantomS2
    S2Forum Buff
    • Apr 2004
    • 46
    • Country: United Kingdom

    #1

    Aslo o/s headlight needed

    I need a standard o/s ( driver) headlight for 3B coupe. Anyone got one ?

    I could actually get away with replacing the glass only if that is available.

    Hoping to get this fixed pretty urgently, ideally collect from within 40 miles or so of Edinburgh

    Cheers

    Tim
    Red S2 Coupe 1992 3B. Bog standard - Ongoing resurrection after major leak fixing program, stripped out and replaced carpet underfelt. Lovely dry, fresh smelling car now Also repaired damaged wiring loom which killed Central locking unit(s).
  • djh
    S2Forum Extremist
    • Jun 2011
    • 1622
    • Home: United States Current: United Kingdom

    #2
    If you get stuck I have a good headlight spare

    Comment

    • Drummer87
      S2Forum Extremist
      • Oct 2009
      • 1644
      • Home: United Kingdom Current: Scotland

      #3
      I might what they look like??? Got a few pairs from 80

      Comment

      • PhantomS2
        S2Forum Buff
        • Apr 2004
        • 46
        • Country: United Kingdom

        #4
        Well, they are 1992-on, Coupe headlights... the 80 headlight is fairly rectangular and the side light which wraps around the front wing is seperate. On the Coupe this is integrated into the whole assembly. Also early coupe lights 1991 and earlier are a slightly different overall width as per 80 saloon. The difference is wether the grill lifts with the bonnet or stays put. The 1992 coupe S2 grill lifts with bonnet.

        This is as I understand it, perhaps someone will concur or correct / confuse

        Anyone ?

        Tim
        Red S2 Coupe 1992 3B. Bog standard - Ongoing resurrection after major leak fixing program, stripped out and replaced carpet underfelt. Lovely dry, fresh smelling car now Also repaired damaged wiring loom which killed Central locking unit(s).

        Comment

        Working...