Audi S4/100/AAN/MC thermostat housing

[terrybullwon]

looking for one of these puppies must be metal preferably Aluminum

[UrS4boy]

looking for one of these puppies must be metal preferably Aluminum

035121121A was never an UrS4/S6 AAN thermostat cover. However, it was on the WB, WC, WE, WG, KU, NF, KU, HX, PX and MC, etc.

http://forums.quattroworld.com/s4s6/msgs/21881.phtml

[terrybullwon]

Thanks Dave so i am now looking for a housing from any of these WB, WC, WE, WG, KU, NF, KU, HX, PX and MC, etc

[terrybullwon]

Anyone?

[UrS4boy]

Anyone?

Given the wide range of Audi inline 5 cyl engines that the 035121121A was used on, it should be easily available at an auto breakers (??).

[terrybullwon]

a breakers in Germany has one for cheap but no uk shipping

http://www.ebay.de/itm/AUDI-80-TYP-8...item484221c0c3

[europeanme]

why not use the ABY version and shorten it....

I've had mine anodised...

[terrybullwon]

Cant it will still be in the way and its already very short!

[europeanme]

can you not invert it....i.e. turn it to 2 o'clock....

on a slightly different topic...I've reveresed that water mainfold fitting....now my turbo line goes behind my block!.....

[AndyP]

This may be a daft question, but what's it getting in the way of?

[terrybullwon]

The dry sump pump in the photo is just layed down flat, in its real postion its alot higher up and the -16 fittings need to really be where the water line is at the minute. The car really was very unfinished at Inters

[europeanme]

does the dry sump work where it is?......sorry for the daft questions but it all seems fairly well set up...

[terrybullwon]

does the dry sump work where it is?......sorry for the daft questions but it all seems fairly well set up...

The belt will be at the wrong angle to clear the sump it has to be higher up, like i said it was just thrown together for inters

[martinjs]

What about an AAN housing James? it points to the rear of the car.

[martinjs]

Saying that they are all plastic AFAIK, i guess you need a cast one?