ABY PCV breather pipe

[Error404]

I'm after the metal PCV breather pipe off an ABY, that connects from the block outlet Dalek head to the cam cover, has anyone who's upgraded to a catch tank set-up got one kicking about surplus to requirements?



Cheers
Alex

[Acidburn]

I may have one anyways from what was left of my engine you might be lucky as I did have one.

[Rusty]

Much better off replacing thta pipe with a really subtle swirl pot to prevent the oil from the head breather overwhelming the rest of the system

[Error404]

I will at a later date but for now I don't want to complicate the engine swap any more than I have already because as I'm doing a shed load of other changes at the same time, there is always an "upgrade creep" where I end up ding and spending twice as much as I originally wanted to!!

[Error404]

Bump, still looking for one of these, if any who has upgraded to a catch tank etc can help? )

[Colesy]

I might have one are they the same on ABY & AAN?

[Error404]

No the AAN one is a different

[Sleeper_Avant]

could you make an AAN one fit??

got one you can have as ive done away with the origional stuff and most of the pipes too

[Error404]

I've got an AAN one here I can cut & weld if required, was just after the right on to save me cleaning it as it will be be full of contaminent so be a PITA to weld.

[Rusty]

Stop being stubborn and do it properly with a swirl pot and catch tank...

[Error404]

In good time, I just need to get it in and running, before I worry about that, otherwise this will turn into an epic to rival Stu's panthero coupe

[GazzaG60]

may have one here alex. ill check to make sure im polluting the environment properly and let you know.

[Error404]

great, thanks Gaz. Let me know if you have we'll sort something out

[J2R]

I have this pipe in perfect condition, i will make a pic and send to you.