Turbo Hose For RR

[steverrquattro]

I need the turbo hose for a UR RR20V. I've had a look on VAGCAT and it has no part number listed so I can't compare to see if it's the same as a 3B, ABY or ADU.

Either way, I need the turbo hose as the one I have is split around the WGF (N75) valve.

Advice on if it's the same is welcome + let me know if you have one in perfect condition.

Cheers.

[spink]

I think i have 1 or 2 that came off RRs,quite possibly same as a 3b.can look tomorrow if you dont get sorted

[europeanme]

I need the turbo hose for a UR RR20V. I've had a look on VAGCAT and it has no part number listed so I can't compare to see if it's the same as a 3B, ABY or ADU.

Either way, I need the turbo hose as the one I have is split around the WGF (N75) valve.

Advice on if it's the same is welcome + let me know if you have one in perfect condition.

Cheers.

off topic, did you speak to Lance about exhausts?

[UrS4boy]

I need the turbo hose for a UR RR20V. I've had a look on VAGCAT and it has no part number listed so I can't compare to see if it's the same as a 3B, ABY or ADU.

You might want to check VAGCAT under AQS, MG1, SG45, Ill. 20-05 and 20-15.

The MAF to turbo hose is 034133357Q and it is unique to the RR.

The turbo outlet to intercooler inlet hose is 034145746L and it too is unique to the RR.

Hope that helps a bit.

[AndyP]

RR - 034 133 357 Q
3B - 034 133 357 AB
ABY - 034 133 357 AA

I'm 99% certain that a 3B will fit.

[europeanme]

I need the turbo hose for a UR RR20V. I've had a look on VAGCAT and it has no part number listed so I can't compare to see if it's the same as a 3B, ABY or ADU.

Either way, I need the turbo hose as the one I have is split around the WGF (N75) valve.

Advice on if it's the same is welcome + let me know if you have one in perfect condition.

Cheers.

why not get Roose motorsport to make you one up if you have the old one....

[Blauer Donner]

Hello,
no the 3B MAF Hose is longer, will not fit!
We have a silicone item exact for the Urquattro RR!
It is a replace part and will fit 100%

More info please send PM
Thanks
Gerd GTM

[quattrostyle]

I had GTM hoses on my S2 coupe, they were fine although thinner than Roose hoses.

[Blauer Donner]

Our Hoses have are improved now, all have 5ply and 6mm wall.
The inlet Hose (MAF) is really strong now!

best regards
Gerd GTM

[Rocco]

Our Hoses have are improved now, all have 5ply and 6mm wall.
The inlet Hose (MAF) is really strong now!

best regards
Gerd GTM

bit off-topic
do you do 92.8 stroke crankshafts for our 5l engines true?

[Blauer Donner]

yes but please send PM or email
service@gt-motorsport.net

best regards
Gerd GTM

[steverrquattro]

Sorted and thanks.

PS I'll have a look at Rouse Motorport and GT Motorsport for hoses on my ADU engine to see waht they do.

[Rocco]

yes but please send PM or email
service@gt-motorsport.net

best regards
Gerd GTM

dont worry,it was only to verify it...because i believe to saw in Ebay.de those crankshafts in the past...from a company called GTM. so is yours

is nice to know because sometimes here there are some people asking for those stroke crankshafts to build new stroker engines...probably with short blocks


thanks mate

[quattrostyle]

Our Hoses have are improved now, all have 5ply and 6mm wall.
The inlet Hose (MAF) is really strong now!

best regards
Gerd GTM

Good to hear Gerd! Will get in contact if I'm in need of new hoses.
My old S2 is driving around for 3 years now with your hoses.