WTD 3.8 bar / RS2 FPR

[twoqu]

I have a different number for the original but thats not to say it hasn't been superceeded or that the one Andy has linked to is not suitable. There is a 3.8bar fpr fitted to Smart models and some Vauxhall models I believe. Again I cannot vouch whether they are suitable.

[Rusty]

Can you confirm the actual Bosch P/N. That might help the OP locate one.

I'll brave the cold tomorrow if I remember. I put up a thread about the same thing, might be a part no in that thread...

[UrS4boy]

This is the one, right?
http://www.bosch-motorsport.de/en-US...2777190155.pdf

Hope so. I've updated my fuel pressure regulator post to include the RS2 3.8 Bar FPR as a 0 280 160 616. I also added the link to the Bosch pdf. Thanks.

http://forums.quattroworld.com/s4s6/msgs/21108.phtml

[Rusty]

Part number on the 3.8 Bar item that I have is 0 280 160 542. just managed to get a picture of it, as the part number is facing the IM and not the outside!

[twoqu]

Part number on the 3.8 Bar item that I have is 0 280 160 542. just managed to get a picture of it, as the part number is facing the IM and not the outside!

Cheers!
Thats the number I have for it!

[Rusty]

That's good. Well worth contacting Bosch and seeing what's replaced it, if anything.

[UrS4boy]

Part number on the 3.8 Bar item that I have is 0 280 160 542. just managed to get a picture of it, as the part number is facing the IM and not the outside!

The 0 280 160 542 does show up as a 3.8 Bar FPR for a Porsche 993. It could be that the other PN is the one currently available in the Bosch parts bins.

[twoqu]

The Vauxhall one looks like it is 0 280 160 642.
Availability would be good but as to whether its suitable or not who knows. Cheap too I understand. I believe there are different sized tails, the bit that goes in the fuel rail.
Anything branded Bosch Motorsport isn't going to be cheap. Be interested to see what that costs.
There does appear to be a source in the US for the "correct" one if you Google the p/n!