Brakes CQ typ85

[Simons]

Hi guys,

I need good front brakes for my coupe quattro typ.85, it will fit in my Azev A 9x16 ET15 rims

Anybody has something for sale in good condition??

Thanks

[quattrostyle]

I doubt you will find something. Better start play around with some Brembo/Porsche calipers, Focus RS discs and custom brackets.

[bluequattro]

Won't g60 s fit?

[Acidburn]

I think you need to swap the front struts for the very early b3 one piece setup which is like the cq one's but has the bolt hole spacing for g60's to bolt up.

[Rocco]

He wants to use something better than that.... Is building a lwb sport quattro with 450\500 hp ,so good brakes required

[Acidburn]

Well with those struts it depends if he's sticking 4 or 5 stud?

If four then since g60's fit i'd have thought the porsche upgrade would with focus rs discs like some other members have done.

[Rocco]

He's 4 x 100

[Simons]

Thanks folks, I think and I will buy some brembo calipers with pads and discs and them make the brackets

[Val]

He's 4 x 100

typ85 = 4x108

[Simons]

yes Val, OE is 4x108 but I redrilled the hubs to 4x100 because I found some Azev A with tyres for 400€, and I decided to buy and redrill

[quattrostyle]

I believe some sort of Ibiza Cupra Brembo brake kit is or was populair with the MK1/MK2 guys, shouldn't be hard to find over there? It would come with the correct PCD and might only need custom brackets and brake lines.

[mrpat]

Ibiza cupra R (2000-2001) ran a 305mm disc and were 4x100

[Simons]

Perfect guys

The calipers are the same as Porsche Boxster S 3.2 Ref. 996.351.425/426

And the disc is perfect, has 57mm wheel hub hole and audi is 57,1...and the bolts are the same, 6mm diameter



Cheers