S2 front hub carriers needed.

[Vorsprung durch Technik]

I need a pair of S2 front hub carriers. Needed for my 5 stud conversion on the 80 Avant project.Have purchased most other items needed to do this but stuck on the hub carriers.Anyone have good ones.Pm me. Cheers

[gavs20v]

Very surprised the 2.8 v6 ones aren't compatible with the hubs. What was the issue?

[Vorsprung durch Technik]

Very surprised the 2.8 v6 ones aren't compatible with the hubs. What was the issue?

Hi Gavs20v, i havent tried any hubs yet just trying to get the correct one before i start the job as don't want to stop half way through because i don't have the right parts.

Did you remember my 80 avant is a 2.6 and therefore i think has different hubs to the S2.I need to fit the 82mm bearing in.I know the driveshafts and Cv joints are the same so that's good just the hubs.Are you saying that 2.8 hubs are the same as S2 hubs? Cheers mark.

[JMLAudi]

Hi

I running 5 stud ob my Audi 80 quattro Avant 2.6 M reg
All I changed was the hubs from 4 stud to 5 stud hubs
Did the same on my Audi 80 Avant 2.6 FWD , L reg


And obviously the brake discs as well

Cheers
John

[Vorsprung durch Technik]

Bump.

[marathontom]

If you look up bearing sizes on the 2.6, 2.8 and s2 there all the same 82mm bearing size. So all should work

[Vorsprung durch Technik]

bump

[Vorsprung durch Technik]

boing

[goodazz]

all b4 v6, 20v turbos (3b,aby,adu) have the same carriers :
p.n.:
left - 895407257L
right - 895407258L

i have a set. will do 60e+shipping