B2 coupe quattro wanted for S1 E2 project. preferably not rotten but doesn't need to be in conquers condition either.
-
-
Welcome to the S2Forum!
Have you sourced the 2 door already? CQ's are getting thin on the ground recently. Keep your eye out on eBay there is a couple at the moment but due to demand the prices have steadily been increasing over the past year or so.
I have been considering using floor pan's from scrap S2 or typ89 80/90 quattro's as these are easier to get hold of and as you will be making the rear bulkhead and seatbox completely it does not mater that the floor is slightly different
Tonks4x4 - The Land Rover Specialist -
Hi tonks, thanks for the reply
Had many 2 door GT's over the years but they ended up going to the scrap. been thinking along the same lines myself about the 90 etc...
I have all the mechanicals. Just need a coupe quattro and either buy or fabricate the panels and start cutting.
It'll be something along the lines of the prospeed S1 as i like they're innovation with using a bit of modern technology with emphasis being on weight saving.
Just need to find a CQ now, but as you say, they are thinning and steadily rising.Comment
-
When I said 2 door I meant Audi 80 2 door saloon....
http://m.mobile.de/portal/index.html#Car/DES/190493909
As to do the job properly you use one of these to use the front half of the car to just behind the B Pillars.
With regards to panels I can supply sportquattro panels for the road and rally version but the S1E2 and Pikes peak moulds need repair.
The other option is to buy the S1E2 kit from the likes of prospeed or Ker Innovotec in Germany.
Tonks4x4 - The Land Rover SpecialistComment
-
rocco has a cq for sale
audi coupe quattro b2 2.2 20vt project (573hp-626nm)
TWINCHARGED power,zero lag
AEM W/M injectionComment
-
Re; tonks, yea I was wondering about the 2 door question. I don't have one, I was under the impression a four door a pillars could have been used for the windscreen rake ?
Have you any links to pics or projects of the kits you do ?
Re; Quattro- nick, have you any links to Rocco's CQ for sale ?Comment
-
audi coupe quattro b2 2.2 20vt project (573hp-626nm)
TWINCHARGED power,zero lag
AEM W/M injectionComment
-
If you do a search on the forum for any SWB or sportquattro you will see the procedure.
The 4 door has the correct upright A pillar but the B Pillar will be wrong and the lengths of the doors are also wrong.
I will be updating the thread for Clive A of his sport build as soon as I get the sheels back from dipping....
Comment
Comment