Borrow/Buy - Clutch Alignment Tool :)

[Error404]

Has anyone per chance got one of the black plastic clutch alignment tools I could borrow / hire for a couple of weeks?

Alternatively if anyone has one surplus to requirements or knows where I can buy one that would be ace

Tar!

[bluequattro]

Make one! I did years ago doing my v8 Capri
Bit of dowel with masking tape round to thicken it out
Come to think of it it may have been a valve lapping tool

[gunman]

Is it for the s2 or 80 clutch? I've done 3 now and used a 10mm 1/2" socket. The thin part fitted perfect into the spigot bearing and the thicker bit was perfect for the clutch plate. Stick it on a 6" ext bar and away you go.

[Monkeymagic]

Alex I have one i can send you for the post cost, they only cost about 12 quid though and are in my opinion useless. I use a steel one which has interchangeable inserts depending on spring plate size.

[Error404]

Thanks guys I used one of the splined I borrowed of Jamo ages ago, it worked really nicely.
I dug out the clutch disc today and decided I'll make myself a tool to do the job