Can't find a proper online catalogue. Does anyone have the product number for Goodridge brake hose kit (braided) for Coupe S2?
-
- -
Was the product number right, which I have send you?www.S2power.com
S2 Coupe - decat - EPS exhaust - RS2 IC - RS2 front - RS2 brakes - RS2 mirrors - Koni shocks - H&R springs - Jehnert doorpanels & Audison Amps - leather & sunroof - VEMS - USA rearlights -
Seems that they are custom made by each dealer so there is no goodridge # available...-Comment
-
Oops, sorry for that...www.S2power.com
S2 Coupe - decat - EPS exhaust - RS2 IC - RS2 front - RS2 brakes - RS2 mirrors - Koni shocks - H&R springs - Jehnert doorpanels & Audison Amps - leather & sunroof - VEMS - USA rearlightsComment
-
Goodridge does supply a set that fits the S2 straight out the box.
The Goodridge number is:TAU0115-6 (which Nero probably send you) This is a six piece kit. 4 hoses for the front brakes (body to strut and strut to caliper) and 2 for the rear brakes.
As you can see there are numerous 2.2V 20V Audis listed. But the kit with this number fitted my S2 without any problems.Comment
-
peter, does this kit work with the 996 front calipers, if not do you know the number of a kit which does?
martinComment
-
I specced my own braided lines and got some stunning custom units made for the front of my avant. Hoses for my 6 pots were about 20 quid for 4 braided, proof-tested pipes. You need to know what to ask for (fitting types etc) but they are fantastic pieces of kit. If you need any assistance with non-standard items let me know and I will furnish you with some contacts.
Lee1995 S2 Avant with some upgrades
Designun Limited....
Aerospace, Space and Motorsport Design Consultancy and hardware supply.Comment
-
Thanks!
Any ideas where I could order this set online?-Comment
-
Lee, i presume i only need to know the thread type in the caliper and the length needed to reach the joint on the strut? the other 2 on front and 2 on rear will be same as stock.
cheers
martinComment
-
To Martinjs:
Yes, they perfectly match with the Porsche brakes, you only need the body to strut ones, the strut to caliper one is replaced by a piece of brake piping, Audi partnumber 8A0 611 721 (left) and 8A0 611 722 (right) (cost ~€10/piece)
For pictures: see
PeterComment
-
thanks peter, just what ive been looking for
martinComment
-
Just to let you know. I'we been digging out info on this goodridge kit. Status so far: no one recognises the number TAU0115-6. I've tried Finnish dealers, AmD and still waiting for reply from Isa-racing in Germany.
Seems that the TAU0115-6 is dropped
-Comment
Comment