2.8 Badge for the rear...

[1781cc]

My cabby needs a badge, anyone got a good solid one? thanks

[quattrostyle]

Just ditch it

[gavs20v]

I've literally just taken mine off , ( about 3am this morning , don't ask ! ) I'll have a look and see if it's still about

[1781cc]

I had taken mine of but there is the outline on the paint below and it looks naff

[gavs20v]

Wet sand with 2000 grit . That's what I did with mine and you'd never know it had been there

[1781cc]

sand paper always scares the crap out of me... thanks for the tip tho, will rustle up some courage and give it a go

[gavs20v]

Use lots and lots of warm soapy water with a very light ( almost no pressure ) let the wet and dry paper do sanding not the pressure from you hand . Be careful on any corners or lips as the paint is normally thinner there

Gav

[1781cc]

good tips, but reading that scares me even more! lol

[quattrostyle]

You'll be fine doing that, just do as Gav described.