WTD: S2 Exhaust, RS2 Springs

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • stevieyid
    S2Forum Fiend
    • Apr 2005
    • 2251
    • Country: England

    #1

    WTD: S2 Exhaust, RS2 Springs

    As per the title I'm after a 3" exhaust or similar for an s2 avant or coupe if it will fit. I'm also looking for rs2 lowering springs compatible with Rs2 shocks

    3'' Longlife Exhaust, Koni Adjustables, H&R Springs, Full RS2 Setup with Mr Nugents RS2 Chips (just need the RS2 Airbox)
  • K Simmonds
    S2Forum Zealot
    • Dec 2007
    • 7627
    • Country: Wales

    #2
    You may or may not be interested in the springs on my RS2, their original RS2 springs modified to sit approximately 40 mm lower on the back and between 35&40 mm lower on the front. Their NOT cut, someone at some point in the cars (probably very interesting) history went to the trouble of getting the stock ones professionally shortened.

    I've driven an S2 Avant with H&R's + Koni's and their not quite as harsh as that set up but the handling is much the same.

    I was going to remove them last week but It'll be at least a month now before I get them off the car.
    1990 B3 2.0 80 quattro.
    1992 C4 2.8 Avant quattro
    1994 MTM RS2.
    1998 B5 TDI quattro Sport.
    2000 B5 TQS.

    Comment

    Working...