WTB urs6 plus black & alcantera interior or all black any style

[orignalS60]

I'm looking for a complete black Interior from a urs6 plus. Prefer with alcantera but
Any black interior that's in decent shape will do. In all honesty I think the only difference
Is seats, door cards, and headliner pillars etc. So no carpet, dashboard, or center console
Needed just everything else. Any help appreciated, thanks.

[saltinot]

I've got a complete (door cards and seats) black leather/blue alcantara sitting in my garage.

[orignalS60]

Good man. Your stateside to. I'm looking for the black leather and black alcantera but it seems
impossible to find. i wouldn't mind snagging yours for a future s6+ project though depending on
price.

[bluequattro]

I've cloth quattro script interior
I could add it to your other stuff and do a really big parcel!

[orignalS60]

Ideally looking for the black leather with black alcantara or grey alcantara.
It's going to be hard to find.

[macspring]

You might wish to confirm that it is for a saloon just to be crystal.

Regards.

[orignalS60]

Yes for a saloon. I forgot to add that.

[orignalS60]

Bump

[orignalS60]

Bump. @ bluequattro you can send me some
pics of the cloth script interior?

[bluequattro]

Avant only, that's why I didn't send photos

[orignalS60]

Anyone with saloon interior?

[macspring]

I think you're chances are slim, unless you can find the stuff over there.

If it was me, given the cost of transportation from Europe, I'd have my existing standard interior or a spare tired cloth one and grey headliners covered in black leather/black alcantara for the seats and alcantara for the A, B, C, & D pillars, and roof lining.

There must be good car upholstery shop within a reasonable driving distance/shipping distance of where you're based, waiting to be found.

By checking these costs in advance, you'll know what's a good deal for you and what isn't from Europe, assuming you find anything in the first instance.

Also if I was over there I'd be looking to source Recaro seat from a Mk 2 Golf and have them recovered, using fresh foam on the other thigh area and then have someone fabricate a mounting for them to allow them to be fitted them into an UrS6, the end result would much better than what you are currently looking for in respect of the to front seats.

The same idea goes for the front grille - DIY.

All the UrS6+bonnet grille is a standard grille, with the chrome film/tape peeled off, (albeit a bit tedious to do), and then a light sand of the bare plastic border trim and then spray it with a rattle can of gloss or satin black. If you're having the can specially made up in a paint shop, they could advise you if it is possible to add a bit of plasteriser to the mix to stop it getting stone chipped. Similar to plastic bumpers and mirrors.

Ordering a black UrS6 front grille from Audi Tradition and having it shipped over there is just not cost effective in my mind, just sayin........when you make your own much cheaper and just as good.

With these cars and parts interior availability, you need to be more creative / innovative to get what you want.





HTH.