C4 urs4/6 leather seats wanted.

[Kieron20V]

As title, I'd like a good set of leathers to replace my worn Quattro script cloth ones in my s4 avant.

Must be manual adjust, black prefered but will consider ecru. Good bolsters too, as mine have sagged, why I want to replace them.

What have you got.

Sent from apollo 13 using tapatalk

[Kieron20V]

Boing

[mac2226]

Hi Kieron have you tried bluequattro Dave I think he's breaking a urs4

[Kieron20V]

Yup, hes got an electric set which I paid a depoditt for, then found out the day before I collected them that they won't fit without the bracket on the floor.

Sent from apollo 13 using tapatalk

[shaun5]

Yup, hes got an electric set which I paid a depoditt for, then found out the day before I collected them that they won't fit without the bracket on the floor.

Sent from apollo 13 using tapatalk

Ive fitted electric seats to my S6 (which had manual seats) as you probably know you need to cut off the original center mount and weld on the center (close to center tunnel) mount.

I have got very good condition black jacquard trim electric (not heated) front seats and rear seat / doorcards. I have also got the weld on mounts that are required

http://www.ebay.co.uk/itm/1720932060...84.m1555.l2649

[Kieron20V]

Yeh I know I need the tunnel side bracket, when I checked first I saw the hole was there on the outboard side and went ahead with the deal. I stripped mine out the night before because I was going to part ex them and saw the inboard mount wasn't there. There's an aircon ventilation duct that seems to occupy the same space though. And I can't really be ar$ed with welding the floor as it will only end up spiralling out of control lol. Have you got any photos of the brackets being welded?

Sent from apollo 13 using tapatalk

[chiefmechanic]

Leather seats

Got the cream set if your stuck. Brian

[shaun5]

Yeh I know I need the tunnel side bracket, when I checked first I saw the hole was there on the outboard side and went ahead with the deal. I stripped mine out the night before because I was going to part ex them and saw the inboard mount wasn't there. There's an aircon ventilation duct that seems to occupy the same space though. And I can't really be ar$ed with welding the floor as it will only end up spiralling out of control lol. Have you got any photos of the brackets being welded?

Sent from apollo 13 using tapatalk

I didn't take any pictures, the air ducting stays where it is. Ive looked for the spare brackets ive got but cant find them it could easily be made from a flat piece of metal.

[andy10v]

Did you see these?

http://www.s2forum.com/forum/showthread.php?t=70375

[Kieron20V]

I did, messaged him way back and he's just got in touch today haha. I got a good set sorted a couple of months ago, cheers!

Sent from my Nexus 6P using Tapatalk