What is needed to run with VEMS?

[spions]

I try to Install Firmware but after instalition vems tune say that ecu not connected.What to do?How to get it run again?

[spions]

GazzaG60 send me pm

[Jamo]

please remove the phone number and send it in a pm

[AndyP]

What happened to Gazza anyway, anybody know?

[Jamo]

He was on the forum last week on the 16th so he's still around

[spions]

I still trying to run vems on ABY,but it's not giving signal to injectors.They don't work.On My S4 AAN it's working perfect.
On standart ECu it's working-aby.

[A80Avant]

the settings on vems may be wrong.
where did you buy the ECu from ? can they help with that?

[Jamo]

I still trying to run vems on ABY,but it's not giving signal to injectors.They don't work.On My S4 AAN it's working perfect.
On standart ECu it's working-aby.

I was told the VEMS AAN and ABY ecu have different wiring

[spions]

So why AAN ecu working on ABY but vems not

[Jamo]

So why AAN ecu working on ABY but vems not

I'm sure in the early vems ecu's a wire had to be switched, infact GazzaG60 was the one who pointed it out

You would be best asking who you bought the ecu from and also checking your injector output settings are correct.

Have you checked for spark and fuel?

[spions]

I have vems V3 with 1.1.27

[Shoto]

hello,i bought vems v3 (plug and play version for aan, aby, adu) from here http://shop.vems.hu/catalog/vems-motronic55-p-122.html , so what can i say....good thing for making your car crazy Spring ir here everyone wants to drive the car from the garaze (from winter sleeping or after good mods) by the way aan and aby ecu's are the same as this vems v3 (3b pin outs are different).i used it for aby and tested in aan.it's working. http://www.cardomain.com/ride/299250...i-coupe/page-8

[A80Avant]

What do you mean?