VEMS firmware versions

[Bram]

Bram keeps on racing his Avant instead of diving in to future firmware upgrades for now

[A80Avant]

jamo,

when i put 16ms on the boost PID controller settings, i get the RAW figure to 128. If i change that to 32, the PWM goes to 64ms. i cannot get both 16ms and 32 RAW config setting at the same time.

how did you do that ?

[A80Avant]

aaaa i see, so i get it now... more reading to do,although im confident that i can make a perfect idle on 1.1.62 as well!

[A80Avant]

we dont use Alpha N on our cars

[Jamo]

It's for the Alpha-N calculation when the MAP is unsteady.

Found an example on the Wiki http://www.vems.hu/wiki/index.php?pa...e%2FAlfaSpider

[GazzaG60]

its woeful.

i have never got my head around wiki.

vems.co.uk seem to enjoy success due to that.

not looked into 62 yet. im gonna try for 57 first. gonna play with vemstune like Jamo is to see where things correlate then go for it.

[A80Avant]

i think it is one of the worst online systems to communicate with other members on the wiki.
i find vems community forum much more helpfull

since 1.1.62 has different size maps, you will have to to some things manually anyway

i still dont understand what MAP corr. table is for...

[Jamo]

i have entered mine all manually.i thiink you have to upload 1.1.27 to vemstune, make it into a vemsconfig file and then change it to 1.1.62 but i thought it was too complicated.

it took me roughly 45mins to put all the info manually

I think this is what Marc is investigating then as it would make for a pig of a convert to go from lower version if you have to re-enter everything.

I'm just playing with a map, do you know how to contact people of the Vems wiki?

Can't find a way to do it.

[GazzaG60]

anybody know of a updating your skils type doc between megatune and vemstune. i cant find easily what i want.

[GazzaG60]

have posts dissapeared? think i may be having computer issues. testing a new port replicator.

yes it looks a pig to import. not sure of an exact utility. like i said peter has kindly offered to advise me on this update as i cannot for the life of me get mine above 1.1.44.

didn't know repo did vems. thought he did the higher end stuff. tactel, motech etc.

vemstune should do straight to 1.1.27 i think. mine does 1.1.27 1.1.44. and 1.1.57 IIRC. firmwares present.

there are some useful file compare programs and also if you go to review mode in megatune and screenshot it its a uselful excercise.

[A80Avant]

i have entered mine all manually.i thiink you have to upload 1.1.27 to vemstune, make it into a vemsconfig file and then change it to 1.1.62 but i thought it was too complicated.

it took me roughly 45mins to put all the info manually

[GazzaG60]

no but it controls boost well and a firmware update will make no difference whatsoever.

get the mapping correct and it should be ok.

precautions are for those who throw caution to the wind or dont understand or maybe worry about the lack of precautions or both/all.

id expect Repo will use his skills rather than potentially troublesome precautionary code. i am 100% sure it will be mapped with those off and maybe turned on at a later date. skills over precaution.

how much use is reducing boost on a melted piston. the same as how much use is retarding timing once the damage is done. you gotta set thresholds first.

i can see why you want them and applaud your seaching for the best feature set your suit your needs.

my experience so far with vemstune has not been the best. maybe why 1.1.27 is still so popular

[Jamo]

the joys of eboost.

Each to their own, I have an EBC also but there are fault conditions in the later vems firmware that can reduce boost so i'll be using that.

Vas have you seen anything that can covert the msq to the vemstune?

Looks like everything has to be entered manually?

[A80Avant]

thats brilliant. im going to try it when i get home

[GazzaG60]

the joys of eboost.