Audi 4.2 V8 (ABZ) on VEMS - config for review

[button]

Hi.
Yeastarday I start my V8 engine in 90q. If You can take a look on my config, and tell my what You thinking about it (look only for ignition an injection, because other stuff is not configured yet). I don't know that the engine fired correctly on all cylinders, because it's running without exhaust and it's realy loud. It also have realy bad work culture on low RPM (but it isn't tuned yet and I don't know what AFR is)

I've connect ignition like this:
cyl1 - EC36/35
cyl2 - EC36/10
cyl3 - EC36/36
cyl4 - EC36/11
cyl5 - EC36/34
cyl6 - EC36/33
cyl7 - EC36/12
cyl8 - EC36/24

And injectors like this:
cyl1 & 5 - EC36/7
cyl4 & 8 - EC36/19
cyl6 & 3 - EC36/8
cyl7 & 2 - EC36/20

I used 60-2 trigger wheel on crank pulley.

My vemscfg file:

http://rapidshare.com/files/328944498/ABZ.vemscfg.html

http://www.sendspace.com/file/rptfma

http://hotfile.com/dl/22659980/bf200dc/ABZ.vemscfg.html

[pnanassy]

why no seq. injection?

Hi.
Yeastarday I start my V8 engine in 90q. If You can take a look on my config, and tell my what You thinking about it (look only for ignition an injection, because other stuff is not configured yet). I don't know that the engine fired correctly on all cylinders, because it's running without exhaust and it's realy loud. It also have realy bad work culture on low RPM (but it isn't tuned yet and I don't know what AFR is)

I've connect ignition like this:
cyl1 - EC36/35
cyl2 - EC36/10
cyl3 - EC36/36
cyl4 - EC36/11
cyl5 - EC36/34
cyl6 - EC36/33
cyl7 - EC36/12
cyl8 - EC36/24

And injectors like this:
cyl1 & 5 - EC36/7
cyl4 & 8 - EC36/19
cyl6 & 3 - EC36/8
cyl7 & 2 - EC36/20

I used 60-2 trigger wheel on crank pulley.

My vemscfg file:

http://rapidshare.com/files/328944498/ABZ.vemscfg.html

http://www.sendspace.com/file/rptfma

http://hotfile.com/dl/22659980/bf200dc/ABZ.vemscfg.html

[button]

Because I want to charge this engine, and I need to control boost controler, stepper motor (idle valve) and solenoid valve which control lenght of intake manifold.

I mainly wanted to check if I have a good set sequence of ignitions.