USB to SERIAL adapter cables

[Rocco]

hi everyone


does someone knows about a very high quality usb to serial adapter cable???

i am looking for one that could be used with windows XP ...or Vista....

i´ve bougth one of this cables in ebay for 9€ shiping included to SPain...and it is a shi_t .it does not want to work¡¡ i´ve tried with 8 kinds of diferent drivers and nothing....


i really need it.... i am very tired with my current one

help friends

[dkw_dude]

I have used this one http://www.moxa.com/product/UPort_1110.htm at work (for connecting to PLC's) and also borrowed it for connecting my laptop to VEMS on the S2. Works very well for me, have tried XP and Vista drivers, no problems at all! It has diode indicators for transmit, receive and power so you can see whats going on.

[Jamo]

As approved by the VEMS forum http://www.easysync-ltd.com/

I have one, not a single issue

[Rocco]

I have used this one http://www.moxa.com/product/UPort_1110.htm at work (for connecting to PLC's) and also borrowed it for connecting my laptop to VEMS on the S2. Works very well for me, have tried XP and Vista drivers, no problems at all! It has diode indicators for transmit, receive and power so you can see whats going on.

oh... very good news

so it comes with windows drivers...(including Vista) so i think that XP drivers come too true??

i am going to buy a new one now

thank you very much

[Rocco]

As approved by the VEMS forum http://www.easysync-ltd.com/

I have one, not a single issue

many thanks too Jamo¡¡

i have to decide wich to buy

[EspenW]

I have one of the £2 including shipping halfway around the world cables. I could not make it work with the included driver, but found one on the web, and used some instructions in a thread on this site, and actually made the thing work.

[Rocco]

http://cgi.ebay.es/CABLE-ADAPTADOR-D...item1c1285171a

this is just my current one
but i´ve bought it from ebay.fr.... i did not knew that in Hong Kong it is far cheaper

this is what happens whem we buy cheap chinesse parts,later we have to pay the double or more

[Rocco]

I have one of the £2 including shipping halfway around the world cables. I could not make it work with the included driver, but found one on the web, and used some instructions in a thread on this site, and actually made the thing work.

i´ve spent a lot of time in the web looking for drivers for HL-340 adapter.....with any luck. it is much cheaper buy another one,i was very nervous with it

[EspenW]

PM your email address and I will send you the driver that worked with my cable

[Rocco]

PM your email address and I will send you the driver that worked with my cable

i did it

[EspenW]

Try this one too:

http://www.davesdrivers.com/forum/showthread.php?tid=1255

[Rocco]

Try this one too:

http://www.davesdrivers.com/forum/sh...d.php?tid=1255

i am with it ....

but i am so tired of the dave6forum drivers i´´ve tried with 7 or 8 diferents from there and the few who works gives me a bad communication between laptop/Vems ...because they do too many resets ¡¡ more or less 300 in 6 minutes....so it is impossible to make a "nice" Log or check in real time any gauge values

i´´ve found more drivers on the net this night,so tomorrow mourning i will try with all again...

the needless/points from the megatune gauges dance like crazy whem conect the laptop with Vems and car ignition On ,so it is impossible read "nothing"

noone here had this problem??

[Jamo]

Rocco have you got the correct VEMS settings? You have to set ECU communication timeout to 40 ms, and delay to 30 ms.

Also you must turn off all the settings for the LCD output for the firmware especially the AIM protocol.

Start vemstune before connecting to the ECU and change the protocol to megatune this should see you through.

[Rocco]

Rocco have you got the correct VEMS settings? You have to set ECU communication timeout to 40 ms, and delay to 30 ms.

Also you must turn off all the settings for the LCD output for the firmware especially the AIM protocol.

Start vemstune before connecting to the ECU and change the protocol to megatune this should see you through.

noone said me nothing about it before....the timeout it is set at 50ms i think. and about delay setting... where can i fin the field for set it to 30ms??

nothing done too with the LCD output....

everydays learning....

[Rocco]

ah¡¡ and the port com....i have it as Port com 1,BUT I DONT KNOW if any other it is better....