Hi.
I have v3.6 Vems with 6+2 ignition option (6 IGBT and 2 logic level)
I put it to V8 engine (AQF + T76 Tubo).
Coil are Beru ZSE033 (COP).
I connected coils in pairs and plug it to EC18 like that
1-6 to Stepper A
5-3 to Stepper B
4-7 to Stepper C
8-2 to Stepper D
and do the pull up +12V with 330ohm resistor to signal wire. I dont have spark on plugs. Any ideas how to connect this coils and how to configure it for work properly?
I have v3.6 Vems with 6+2 ignition option (6 IGBT and 2 logic level)
I put it to V8 engine (AQF + T76 Tubo).
Coil are Beru ZSE033 (COP).
I connected coils in pairs and plug it to EC18 like that
1-6 to Stepper A
5-3 to Stepper B
4-7 to Stepper C
8-2 to Stepper D
and do the pull up +12V with 330ohm resistor to signal wire. I dont have spark on plugs. Any ideas how to connect this coils and how to configure it for work properly?