Tweet
This is how you correctly fit it:
That is all.
That is all.
-
now why should we fit one? -
Looks very neat like that, if they are more reliable than my vmap I may follow on.
Prj did you receive my pm ?Comment
-
Similar to the 3 Bar Freescale MAP sensor that EFI Express sells
http://www.efiexpress.com/catalog/pr...products_id=82
Last edited by UrS4boy; 6 March 2014, 16:10.RS2'd 93 UrS4 5 spd sedan
94 UrS4 V8 6 spd manual avantComment
-
3 bar map sensor with an almost identical output to the bosch one, but for £25 IIRC.Originally posted by Ruffiano View PostCurrent-2004 Impreza PPP wagon
Sold-92 3B coupe-RS2+, 996s, konis, rear torsen, forged rods........
Sold ABY-stockComment
-
You can see of page four a elektrical circuit,
http://www.freescale.com/files/senso.../MPXH6300A.pdf
MatthiasComment
-
Nice and tidy. Pink wires are a lovely touch.Comment
-
can't tell from that pic, but are you tying it to the plastic cradle? looks ok, mu only issue would be if that sensor is allowed to bounce around which could snap off the solder joint on the legs.Marc Swanson
Proprietor, EFI Express
95.5 //S6 Avant
90' Coupe Quattro V8 4.2L twin turbo
93' //S4
83' UrQ
97' F250 7.3 diesel
Comment
-
There is a zip tie behind the sensor...
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - ProjectComment
-
-
here the picture..
and you can use the MPXH6300 = 300kpa or MPXH6400 = 400kpa..Comment
-
I made it this way...
does not win a design Price, but it's very solid.
RegardsComment
-
Looks alright.
I have fitted more than 100 of these sensors (I buy them in bulk 25 at a time, and I am on my 6th set), and when you have that quantity, then a simple and solid solution is the best for me - only requires one cable tie.
And so far I have not had issues with any of them coming loose.Comment
Comment