Rs2 Brakes

[A1QSHIP]

OK, I have decided that if I have to convert my 4-bolt hubs I might as well convert to the Porsche bolt pattern. I want to do the full rs2 front & rear brakes, hubs, e-brake, calipers, etc. What I do not have is a list of all the parts required. Can anyone tell me what the #s for the front & rear hubs, rear calipers are? From the forum I have been able to get the #s for the other components and have acquired a few pieces already. I have thought about this for some time and although it may be more expensive initially, I believe this is the route I want to take.
Thanks, Chris

[Greg_S]

chris do some searches thru the forum. I think RS2CQ may have done this conversion on his coupe

[A1QSHIP]

Greg thanks for the info. More specifically, I would like to know the Porsche P/Ns. I have access to both new & used Porsche parts.

[A1QSHIP]

Rs2 Hubs

Anyone?

[alg]

Try this link http://www.s2forum.com/forum/showthread.php?t=9177 that I posted previously
You would have found this using search under porsche brake options

Oh and if you are interested I have discs and standard front calipers for sale following my big red upgrade

[A1QSHIP]

Rs2 Brakes

Thank You Alastair. I have already printed out this information. I still require the P/Ns for the front & rear hubs. I have most all the other parts but the wheel-hubs remain elusive. I had hoped to source these items from a friendly Porsche breaker but did not want to resort to buying alot of suspension assemblies to try different hubs. Again, Thank You.
Chris

Nulla tenaci invia est via

[alg]

Never seen them posted. I would check 'the spanish' posts on here re his conversion. Or just pm him and ask.