RS2 Bracket dimensions

[Jamo]

I'm after any technical drawings and dimensions of the RS2 Caliper mounting brackets.

I want to go to 340mm disc but i'll need to have custom brackets sizes made by a machine shop (or Wabtheking :mischeif: )

Cheers

[S2 Ant]

Is the 340mm disc a standard one available?

Would the Porsche caliper make use of it all?

My Calipers leave a small lip on the outside where it doesnt make full use of the disc. I would be interested too tho if this seems worthwhile as my brakes look waaaaay too small under the 19's

[Error404]

bump to an old one... did any dimensions ever materialise?
I'm looking into some custom brackets to perfectly fit 996 monos and 323mm S8 disks without spacer washers etc, I know of somehwere that I can hopefully get a custom pair machined for under £100 :mischeif:

[Jamo]

You can buy them from Bry and AndyP that do the job which are milled Seat brackets.

[Error404]

Thanks for the heads up Jamo

are they that cheap though i wonder.... i'll PM the brake fairies

[Sonic]

When i did my conversion i used 996's with 323mm S8 discs and a seat ibiza carrier, cut as below -

[anton]

When i did my conversion i used 996's with 323mm S8 discs and a seat ibiza carrier, cut as below -

do you have the full dimentions of this sonic?? i have access to a machine shop for free only for one or two bits for myself before anyone asks..... one of the perks while at university

Ant

[Sonic]

Afraid i dont have dimensions, only what to cut relative to the seat carrier.

I just took the standard SEAT Ibiza Cupra R carrier (part no 6KL 615 421) and had it cut down to the size required. They were pretty cheap, about £40 for both IIRC.

[Rusty]

do you have the full dimentions of this sonic?? i have access to a machine shop for free only for one or two bits for myself before anyone asks..... one of the perks while at university

Ant

Wait till you get to work in a place with a machine shop... "Jig part 204 - bracket 5" 2 off, (aka S2 snub mount bracket) Shame my contact is ******ring off for a year

[veneto rs2]

Hi all

http://www.audisportclub.com/forum/showthread.php?t=536

Have a look on post number 6 on the above link.

Stefano

[anton]

the diagram there shows a bracket with only 2 holes, no place for the caliper to mount to?......unless i've missed something somewhere?....

Ant

[veneto rs2]

oopppsss.....
did'nt realize that..... sorry

But i'm sure the guy that posted the drawing has the quote that is missing (perhaps another sheet?)
Contact him at: attilio.lavezzari@audisportclub.com
The guy's swiss but speaks and write in english no problem.
I'm sure he can help you out.

Stefano

[anton]

cheers stefano i'll send him a message

Ant

[kwlw]

cheers stefano i'll send him a message
Ant

Then - post results here

Sau

[europeanme]

Hey Anton,
did you get any information back from this guy??...I am currently looking at having a set made work but need dimensions first...preferably the SEAT bracket as this needs no spacing for the 323mm disc...

Mike