will they fit under 16" avus rims with 325mm or 315mm A8/S8 disc? help urgently needed!!
-
-
Dont know about the caliper, but I believe you can only fit A8 disk with the 16"avus rims.
BRY is the mann who knows it all. This is what i got from him:
3) A8 323mm discs for a 17" wheel from Audi or local Motorfactor
or A8 314mm discs for a 16" wheel from Audi or local MotorfactorGetting everything sorted out for my 5++ hp project
-
322x32 will fit under 16" avus wheels.Tim
1995 S2 Avant, ruby red - ** SOLD TO ROSS **
Golf Rallye G60 ** SOLD **
Golf MK2 Oaky with R32 engine
Audi A6 Avant 1.9 TDi 130
Golf MK2 8v Race carComment
-
315mm or 324mm ? ?Originally posted by tom2001 Avus Silver B5 RS4.
2004 A4 Avant 1.8T quattro Sport-LE.
1995 S2 Coupe - sold (sniff)Comment
-
324? with porsche GT3 4 piston callipers?
HELPComment
-
six pistons or four?Kingdoms are run by Kings, Dictatorships are run by Dictators.
England must be a Country. :mischeif:Comment
-
four pistons, BRY help me please
Comment
-
Check this
He has them on the 314mm disc.
I doubt that they will fit as they are a much bigger caliper than the 996 Boster 's'
Big brakes = big wheels
Kingdoms are run by Kings, Dictatorships are run by Dictators.
England must be a Country. :mischeif:Comment
-
I found this on the internet some time ago, This company sells a uprated kit for audi cars. They say that gt3 front calipers must fit in a 16"wheel (But i really doubt that)
"This kit has been quite popular here in the US as the stock S4/S6 brakes are not very effective at stopping this heavy & powerful vehicle under track conditions. There are currently 2 front kits for this car.....a 993 turbo caliper kit and the new 996-GT3 monoblock kit. Both use Porsche's 322x32mm "perforated" (the holes in the rotors are cast, not drilled) disks. The GT3 monoclock calipers are more rigid (these will most likely be the stock calipers on the new 996 turbo cars) and use a slightly larger (78.3 sqcm vs 75.3 sq cm) brake pad. We currently do not offer a rear kit for these models.
993 Turbo Front Kit (specify red or black calipers) $2,495.00
GT3 Front Kit (red calipers only) $2,795.00
5mm Spacers (H&R) $55.00/pair
10mm Hubcentric Spacers (TUV approved) $100.00/pair
15mm Hubcentric Spacers (H&R) $100.00/pair
Lug Bolts (M14x1.5)(specify length, conical or ball seat) $3.50 each
Either kit will work with factory 16" alloys although spacers may be required. H&R's 5mm spacers will work with steel wheels but a 10mm hubcentric spacer must be used with 16" alloys to properly stabilize the wheel. Spacers are generally not required with 17" or larger wheels. Don't forget the longer lug bolts is you purchase spacers. "Getting everything sorted out for my 5++ hp projectComment
-
ErikB, any link for them to ask?Comment
-
I had to search for a while, but found it, http://www.autobahn-performance.com/bigreds/more.htm
Autobahn Performance
6476 Buford Hwy.
Doraville, GA. 30340
Tel: 770.409.8288
FAX: 770.409.0639
aperform@bellsouth.net <aperform@bellsouth.net>Getting everything sorted out for my 5++ hp projectComment
Comment