bolts for 996 calipers

[vonbeck]

are the bolts required for fastening the seat caliper carriers for the 996 upgrade the standard s2 bolts for same job and are the hex bolts for the calipers to the brackets the porsche standard parts eg
carrier to hub m12x1.5x22
caliper to carrier m12x1.5x75

part numbers would be greatly appreciated

[Dave cook]

are the bolts required for fastening the seat caliper carriers for the 996 upgrade the standard s2 bolts for same job and are the hex bolts for the calipers to the brackets the porsche standard parts eg
carrier to hub m12x1.5x22
caliper to carrier m12x1.5x75

part numbers would be greatly appreciated

N.100.880.03 = caliper to carrier m12x1.5x75
N.100.436.02 = carrier to hub m12x1.5x22

[Mikes2]

You should be able to use standard RS2 bolts if you are using the RS2 bracket.

Numbers are

N 100 880 01 M12x1.5 25mm
N 100 436 02 M12x1.5 65mm


You'll need 4 of each

[4WheelDrifter]

Here's the P/Ns for the ones I used:

Calliper - Carrier
N 100 650 02 (allen key head bolt) M12x1.5x70mm (x4)

I also used these as the S2 ones were too long, and fouled the inside of the disk:

Carrier - Strut
N 100 880 03 (allen key head bolt) M12x1.5x25mm (x4)

They're the bolts used with the standard RS2 big reds.

[BRY]

or just ring the installer who has them anyway

[Dave cook]

or just ring the installer who has them anyway

Your not the only one Bry :mischeif:

[vonbeck]

sorry mate just wanted to get all the bits do you think i should get the stainless flexi hoses while im at it or not? have you put red led`s in the u know what yet?

[vonbeck]

have a lookie my young jedi ryan v`s dorkman http://www.elrellano.com/videos/video79.shtml

[BRY]

The LEDs are not in there yet
Now I am the master
The Darth Lighter is mine!
Jamo was not worthy

[BRY]

Your not the only one Bry :mischeif:

You are wrong my young apprentice, I will be installing these, it is written in stone.
I have a Jedi Transporter for the trip, almost as big as Jamil's Death Star
I have to fill it with RS2 bitz